|
:D Just goes to show.......you can take the boy out of the trailer park but you cant take the trailer park out of the boy!Welcome back Super Steve.
|
Originally posted by Steve 1 What is it that I am lying about? Do you and Wilson still work there ======================================= The Lie like everything you say!!!!!!!!!!!!!!!!!!!!!!! :mad: :mad: :mad: :mad: everything you say about Thad Allen and Apache LLC for one... Also we have a lot of work there.. The Plug do not get me going on it ... that will backfire on you.. Stop with the crap.. OSG |
Originally posted by Spitfire1 Hi Steve....so if I am reading this right.....he is no longer your boss or partner????? But rather a customer??? Just wondering........ Rich Rick OSG |
When you coming back down???
|
Another load of CRAP. :rolleyes: :rolleyes: :rolleyes:
|
Carl:
Not just any 41 The Strakes on this one are right and the bottom is straight.. The weight I do not know !as I have not yet been asked to bid the on Layup of the Molded boats.. |
Miller:
I was Building the T-4 It has a new vented bottom Design with a lot of safety built into it. Per Example the Lift strips/strikes float/run across the vents uninterrupted !! It will track like on rails and there are three in the aft section per side. Running dead straight to the front (the way they should) 1 Main vent and two st udder that dampen when turning.. The finished projected weight wet is around #7500 and there is a Ballast tank in the bow if needed. Horsepower is 2500 with dry 6's Should run decent :D |
1 Attachment(s)
Miller here is a picture (I have many of this) There was a lexan window that was across the vent and we infused the entire strake one shot..The plastic "Window cull/plate was removed after but allowed me to monitor resin growth from the Bottom..Cool project all SP systems. Had to steal some technology from my Cats for this job.
The glass schedule is secret. |
Steve, I dont know what your building(the strakes and bottom are just fine on my boat), but from what I have read so far it ain't an Apache. Good luck to you. Let us know when Thad has to change the name of the company. There can be only one ............. :p
|
1 Attachment(s)
Originally posted by ApacheCarl Steve, I dont know what your building(the strakes and bottom are just fine on my boat), but from what I have read so far it ain't an Apache. Good luck to you. Let us know when Thad has to change the name of the company. There can be only one ............. :p |
| All times are GMT -5. The time now is 12:29 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.