![]() |
Originally Posted by ROTAX454
(Post 2777014)
Seems like the right time to have boats painted. Mine is currently at Mitch Tolan's place getting some upgrades. If you need any interior work done, I can introduce you to the McLeod's. Their shop is right down the street from mine. If you didn't know already, they are still doing Awesome interior/sunpad work.
|
Originally Posted by Ran-Dom 32
(Post 2777103)
Richard what are you getting done? :party-smiley-004: -
|
Originally Posted by feline frenzy
(Post 2777036)
thanks but i called mcleods and they wouldnt do any custom interior work,i had my back seat cut out and moved back 3 feet,and i purchased aluminum bucket seat frames from summint racing,im going with outboards so now i have lots of cockpit room and storage,and a seperate bathroom,now i need to find someone to make doors and a windsheild.
|
Originally Posted by ROTAX454
(Post 2777339)
Randy, Getting the race fairing re-shot. Did not like the design-----alittle dated. Mitch is also shooting the entire cockpit liner. Faded gel just didn't look right next to the new white paint around the ajoining area's. When I get it back to my shop, (primers is already been shot) I will get to the finish coat for the engine compartment. Then the fun starts-------assembly time. Any winter time projects for yours?
|
no my cat was never powered,i bought a bare shell in late 06,spent a year redoing the layout,installing bulkheads,changing the balance point,had 75 gallon tanks made moved location back 2 feet,and pretty much buying all the goodies,and im going with outboards for the extra 3 feet of cockpit room,and the power to weight ratio,as it sits now my bare shell is just under 2000 lbs.i did everything in eglass and epoxy and having knee braces and floor and dash done in carbon fibre,so hopefully when its said and done it should scream,
|
and rotax ill try mcleods again i do like their work it is top notch,they were just to busy doing sunsation at the time,but first i gotta see what my paint man comes up with??????????i cant wait,like a kid in the candy store,but thats still months away.
|
Sounds like a nice project your working on, keep posting on your progress, it's going to be a long winter - The 30 Skater your talking about is that LS7 boat? I will check it out in Miami -
|
not sure if its the ls7 or not but one side is blue and silver with trible flames and the other side is blue with red and yellow honeycomb,
|
My dyno guy has a new 30 Skater. He is going to use these short blocks as the platform for his new motors. One word: SWEEEEEEEET
http://www.worldcastings.com/news/wa...awk9.8deck.htm |
Originally Posted by Ran-Dom 32
(Post 2777103)
Richard what are you getting done? :party-smiley-004: -
|
| All times are GMT -5. The time now is 02:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.