First time out in my Aweome......
08-08-2009 | 09:30 PM
#11
Registered
Joined: Jan 2005
Posts: 1,047
Likes: 0
From: Northern VA
I talked to Mel a couple days ago, he said it took a while to nose over last time he and Joel were breaking in the motors.
Maybe the coil wire was loosing power getting on plane. Done know.
Mel and i think you may be over proped.
Martin and i went on a radar run with the old set up (totally different i know. bravo) but he tried some big props and same thing, about 2 grand and would not fall over.
Good luck
Maybe the coil wire was loosing power getting on plane. Done know.
Mel and i think you may be over proped.
Martin and i went on a radar run with the old set up (totally different i know. bravo) but he tried some big props and same thing, about 2 grand and would not fall over.
Good luck
08-22-2009 | 08:34 PM
#13
Thread Starter
Registered
Joined: Sep 2003
Posts: 589
Likes: 13
From: Ludington, Mi.
[QUOTE=Ran-Dom 32;2936129]any updates[/
Can't get a break in the weather. Just continue to lean her out now running 84's in primaries 3.5 power valve, 92 in secondary no pv just gonna keep leaning her out till she goes or melts down..... I think it's gotta a crazy a$$ wild cam ...more cam than she can handle w/out a blower.
Can't get a break in the weather. Just continue to lean her out now running 84's in primaries 3.5 power valve, 92 in secondary no pv just gonna keep leaning her out till she goes or melts down..... I think it's gotta a crazy a$$ wild cam ...more cam than she can handle w/out a blower.
