No, you still have to get behind the deck and get a wrench on the nuts, and a GOOD screwdriver to undo them. Only the drain cup can stay in place. I donīt have any pictures of the assembly. I know the feeling before you start a job like this, but you just have to do one at a time, and do it slowly...... or give the whole lot to Doc! Maybe itīs his birthday, soon....
30 Outlaw 2005 - the tank fill bezel is simply a monster gauge item (2 5/8" inside dia.). The original screws are long enough and if you put a rubber grommet on each screw under the filler flange they will hold the bezel centered. I siliconed everything together - because I didnīt want fuel fumes making their way into the cabin.

Hey,

If the German's can install them you should be able to. Need me and Greg "TeamBaja" to come over and help?

I like that idea!

Nice job Stephen, and thanks for the information.