Custom Dash Panel for 36 Outlaw
#12
Registered
Joined: Nov 2005
Posts: 539
Likes: 0
From: Pittsburgh, PA & Marco Island, FL
Ed,
Actually the dealer ordered the blank dash panel and did all the cutting and re-wiriing of the gauges. Took forever to get, and cost an arm and a leg, but I like the stock look and you can't beat having it directly in front of your line-of-sight.
Actually the dealer ordered the blank dash panel and did all the cutting and re-wiriing of the gauges. Took forever to get, and cost an arm and a leg, but I like the stock look and you can't beat having it directly in front of your line-of-sight.
#13
Thread Starter
Registered
Joined: Jun 2005
Posts: 103
Likes: 0
Pic of the new dash from over the weekend. Worked out great. The only thing I gave up was the speedo and one voltage gauge. Its a common electrical system anyway so I really only needed one. SO nice to have the GPS in the dash. The Garmin 545 is fast and great detail. I picked up a factory refurb and flush kit for like $700!
#14
Why not buy some sheet stock aluminum and make your own. Use the old one as a template. After you have figured out and cut where everything will go, powder coat it or have it covered in a cool theme etc.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#17
Pic of the new dash from over the weekend. Worked out great. The only thing I gave up was the speedo and one voltage gauge. Its a common electrical system anyway so I really only needed one. SO nice to have the GPS in the dash. The Garmin 545 is fast and great detail. I picked up a factory refurb and flush kit for like $700!


#18
Custom Interiors & More
Joined: Jun 2008
Posts: 1,742
Likes: 2
From: Bucyrus, OH.
Dean @ Checkmate was using Team Marine also, and said they are now belly-up? Smitty's idea may be your best bet?
TEAMBAJA has some older 36 panels, but they all have gauge holes punched in them.
XT
#19
Registered
Joined: Oct 2002
Posts: 558
Likes: 0
From: Indianapolis, IN
I have two 33 Outlaw panels that are new, one purple powdercoat, the other factory carbon-fiber. Also one I think for a 342 carbon fiber. All are new, just didn't use.
If anyone has an interest I will post some pics after the LC poker run.
If anyone has an interest I will post some pics after the LC poker run.
#20
Gold Member

Joined: Jul 2008
Posts: 3,748
Likes: 869
From: Delray Beach, FL
Just buy 3/16 sheet carbon fiber from Dragonplate trace your current dash outline, cut it then router the holes yourself with a dremel. I did mine in about six hours complete install. You can get pre treated carbon fiber with UV protectant or, I painted mine with clear spray polyurathane and it looks great. Get the 8 or 10 inch Garmin they look fantastic and you can hook a DVD player to them and play DVDs atnytime you want with the player hooked to the stereo for sound.
Last edited by Keith Atlanta; 09-09-2009 at 04:00 PM.



