[QUOTE=JasonSmith;2284556]I could fart 2 & 1/2 pounds of boost QUOTE]

Remind me not to go to dinner with you Jason! :eek::D:D

[QUOTE=BajaFresh;2285352]Dinner. You'll be just fine at dinner. It is the ride home when I have controll of the power windows you should worry about!:D

Raylar seems sweet! Does anyone know if the BCK-103 kit produces 525HP for the 496 Mag also since I don´t have the HO.

It should. The stock engines are the same except for Cam & ECM. The only thing with the BK103 kit on the non mag that you would need to do is the ecm recal to be there if my memory serves me correctly.. ;) Jamie / Lakeside


.

Thank you! Talked to Ray at Raylar and he said the same.

2004 496mag ho, I think its an ok engine, but like everyone I would like to get more speed out of it. I ran a labbed 25 mirage plus at 49 to 5000 rpm and ran 70. I now run a labbed 24 bravo 1 and get 68-69,but it gets there quicker. Limited budget, about 3 grand, any help fron other members would be great. thanks, steve

Raylor or Bob Llyod at Full Throttle Marine. They can do wonders with a 496.
Jay

For 3k About all you can do is exhaust by the time you get done with shippingt & thats if you install it yourself. That would be a system like Dana Or Stainless.. Cmi will be a lot more.. If you had more funds to spend I could hook you up with one of My Supercharger kits engineered for the 496 Mag Ho.. I just installed one on my personal boat.. It hauls ass.. The other good way to go is Ray's kit if you dont like blowers.. We also sell & install his. But 3k wont get you too far these days.. :)

Jamie / Lakeside


.

i have a pro charger m5 18ib pound boost 1375hp 90 at half the power 540 inch it is fast

your last post you had a m4. Now you have a m5 in just under three minuites.