Dock already has named the main suppliers of parts for our boats, and if you keep your eyes open in this forum, you will find all you need - except the space on a 25 to fit it all in!

What is that to the left of your glove box?

Thatīs a Smartcraft SC1000 Monitor from Livorsi. It gives you 10 readouts of all the monitored engine functions, including a couple really smart ones like fuel used (in gals or liters), momentary fuel consumption (scary!), engine hours (logged on the ECU), raw water pressure (after the impeller) and then all the normal stuff like revs, volts, oil pressure, oil temperature, water temperature. It is one button easy to use, and plug and play on any smartcraft motor.
The fuel used function is amazing. Reset it when you tank up the boat full, and as long as you know what the tank holds, you can run right down to the last two or three gallons, if you have to. It is that accurate! No more guessing, when you arrive at your boat and want to know what your range is. It tells you what has been used since the last reset. You can even connect the fuel gauge up to it and a GPS antenna so it will give a direct readout of the range, as you go.
I placed it left because it gives the copilot something to play with, and keep an eye on the motor when Iīm busy!!! I can read it from the drivers seat, no problem, and it is lit up red like the rest of the Monsters. It is in use all the time.

169$ - plus the harness (depends on the application - mine just plugged right in at the dash on my 2006 motor).

That's cool! I like that