Looks like a trailer to fit the 48 OUTERLIMITS cat being built for Lake Cumberland.

We think alike:ernaehrung004:also ya might want to get some Mcguard wheel locks.

another thing ,I was told they changed up the bearing system, its air pressurized? You might ck into it if its something ya cant just get it anywere. I know on my Myco The rear gease seal is a special unit and has a stainless sleave that fits over the spindle you can only get from Myco , so if your broke down on the side of the road ya stuck:mad:, I bought a complete hub and all spare parts just incase.

Also if you have a blow out and the tire comes apart it usally takes out the brake line,the metal and rubber one, been there:eek:So I have spare made up brake lines and all parts :D

Rob:D

You have no idea how much we think alike. My saying is "piss poor planning promote piss poor performance"!

I bought a complete set of the steel sleeves and oil seals for all six wheels from Myco and I carry all the bearings, races, nuts, washers and caps and a set of spare brake pads. It is good insurance and I don't want to be sitting on the side of the highway 500 miles from home with my thumb up my a$$.

With proper maintenance I have never had an issue, but I have saved a couple of friends out on the road that were not prepared.

Also I do have a spare brake line for just that reason and I need to double check and make sure it matches the new trailer. I assume they are the same. I have seen many a freind have that problem also. When those load range "E" tires blow with 80 PSI they can do some damage.

I really like the new system on the seals. It looks like it is an improvement.

I'll put the center caps on when I do the wheel locks which will probably be Sunday afternoon since we will be at the Charlotte Motor Speedway for the Friday and Saturday night races.

Thanks buddy

The guy in the picture closest to the trailer with the blue shirt and dark pants is the owner of this trailer. I did not get to meet him but was told he was there to check it out and that a race boat was going on the trailer but they did not give me any other details.

Here is the new wheel you will be seeing on the new 08 Myco trailers next year.

Personally I do not like it and shared my opinion on that while there. I think you need a polished shiny finish on a wheel to really set off the trailer. This looks too much like aluminum and will just plend in. Just my opinion we will see.

Did they thank you for your opinion or just say:Whatever:
:D:D
Jay

:Whatever:

The trailer looks sweet. Wheels might look better than you think.

Hope everyone is watching build it bigger right now, they are in Miss Geico's garage, and guess what trailer Miss Geico is sittn on, nice plug for all. Gettn ready to race Budweiser boat which is one of only a few piston boats left in that class.

Doc, trailer (and boat) look great. That thing must've been a pretty penny!

What'd you do with your old trailer?