My weekend project

Reply Subscribe

Thread Tools

02-20-2008 | 09:38 AM

kennyo

Thread Starter

Registered

Joined: Feb 2004

Posts: 3,710

Likes: 2

From: MT. JULIET, TN.

My weekend project

This what my engine compartment looked like 3 years ago.....

Attached Thumbnails

Last edited by kennyo; 02-20-2008 at 09:48 AM. Reason: add pic

02-20-2008 | 09:40 AM

kennyo

Thread Starter

Registered

Joined: Feb 2004

Posts: 3,710

Likes: 2

From: MT. JULIET, TN.

This is what it looked like last week after engine and step plate removal....

Attached Thumbnails

02-20-2008 | 09:41 AM

kennyo

Thread Starter

Registered

Joined: Feb 2004

Posts: 3,710

Likes: 2

From: MT. JULIET, TN.

...and this is what it looks like now.

Attached Thumbnails

02-20-2008 | 01:04 PM

Smitty

VIP Member

Joined: Apr 2001

Posts: 4,213

Likes: 0

From: Chicago il

Nice job!! Are you going to put the diamond plate back on??

__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com

02-20-2008 | 02:57 PM

kennyo

Thread Starter

Registered

Joined: Feb 2004

Posts: 3,710

Likes: 2

From: MT. JULIET, TN.

No I went with that stuff on the bathroom walls. Textured, gloss white, NO polishing!

02-20-2008 | 04:54 PM

Dock Holiday

Charter Member #34

Joined: Oct 2000

Posts: 7,151

Likes: 2

From: Beautiful North Carolina

Quote:

Originally Posted by kennyo

No I went with that stuff on the bathroom walls. Textured, gloss white, NO polishing!

It looks great.

What exactly did you use?

02-21-2008 | 09:33 AM

kennyo

Thread Starter

Registered

Joined: Feb 2004

Posts: 3,710

Likes: 2

From: MT. JULIET, TN.

I don't know what it's called. It's real thin but not plastic. It's about $30 a 4x8 sheet. People use it around bathrooms and kitchens. It looks better than the rough gelcoat and won't turn yellow like paint.

02-22-2008 | 11:21 AM

Dock Holiday

Charter Member #34

Joined: Oct 2000

Posts: 7,151

Likes: 2

From: Beautiful North Carolina

Is it very flexible?

What did you use to mount it with?

02-22-2008 | 03:32 PM

kennyo

Thread Starter

Registered

Joined: Feb 2004

Posts: 3,710

Likes: 2

From: MT. JULIET, TN.

It will bend up to a point. It cracks if you bend it too much. They make corner pieces and joints for it also. They sell it at lowes. I used silicone to attach it to the boat.