Baja 35 by Fountain? ??? Who has one?
#1
Registered
Thread Starter
Baja 35 by Fountain? ??? Who has one?
Who has a 35 Outlaw Baja by Fountain with 496 Mag Ho's?
How fast is it? 75? 80?
I know a 35 BBB (Baja by Beak) with 525's will run 84mph, just wondering how fast one with HO's will run.
Thanks.
How fast is it? 75? 80?
I know a 35 BBB (Baja by Beak) with 525's will run 84mph, just wondering how fast one with HO's will run.
Thanks.
#4
Registered
Jason,
The Fountain 35 ran 84 like you said, but my 35 by Brunswick will run 84 also in perfect conditions. Just like they probably did to get 84. So the 76 with HO's seems to be a little bit of a push. But they did tell me that.
The Fountain 35 ran 84 like you said, but my 35 by Brunswick will run 84 also in perfect conditions. Just like they probably did to get 84. So the 76 with HO's seems to be a little bit of a push. But they did tell me that.
Last edited by redbud35; 08-25-2009 at 09:02 PM.
#5
Registered
redbud ,,i know you where thinking about shorties,,,but didnt know if they would work,,,,iam looking at the cigs,,,gladiator or top gun and see what works for them,,,if you look at the bottom of the boat,,it looks close to the 35 outlaw bottom,,with the notch and all, ,,looks like a lot of the cig are running the shorties
#6
Registered
redbud ,,i know you where thinking about shorties,,,but didnt know if they would work,,,,iam looking at the cigs,,,gladiator or top gun and see what works for them,,,if you look at the bottom of the boat,,it looks close to the 35 outlaw bottom,,with the notch and all, ,,looks like a lot of the cig are running the shorties
#7
Registered
#8
Registered
yes raylar,,,103 kits,,,i went with raylar because ,,when the time comes to refresh the engines,,,i will put in his forged internals,,bigger cam,,and e.c.m. reflash,,for the 625 h.p.,,,i can use the same heads and intake,,,kinda planed it from the start this way
#9
Registered
Smart move. What prop and speeds are you getting?
#10
Registered
labbed 30 ,,from bblades,,,,81mph,,,my rev limiter is lower than yours,,,,if i had to do the drive setup today,,,heres what i would do,,,go with extension boxes,,and the -2 imco,s,,,