Cleaning House Baja Style
 

Hey guys I just built a new shop and while the wife and I were moving all my tools and parts she convinced me to close down my personal marine parts center.

Everything is going!

I'm one of those guys that keeps a spare of everything. As the old saying goes "Luck Favors the Prepared". Well I have been very prepared and also very lucky.

It will take me a few days to get all this stuff on here but you have to start somewhere so here we go. If anyone is interested in anything please send me a PM and first come first serve.

Thanks

SOLD - bahammer

Lot #1

BRAND NEW Kodiak disc brake calipers with pads and mounting screws. These are used on many different trailers but where purchased for my Myco. Yes they are the Cadmium Plated with organic brake pads.

If you shop online they go for around $85.00 each. I'll take $75.00 for the pair plus UPS ground shipping charges.

$75.00 BRAND NEW

SOLD - ANCHORMAN

Lot #2

Two NEW hydraulic brake lines and two stainless steel u-bolts from Myco.

Ever blow a tire and take a brake line out with it? Well worth having an extra!

New to replace damaged u-bolts for tie downs or need to add extra's?

Total new price from Myco is $42.00

I'll take $20.00 total plus UPS ground shippping charges.

SOLD - QUINLAN

Lot #3

Compass

Work perfect and has light for night use. I was going to put this in my Jeep put there was just no place good to mount it.

First come $25.00 + UPS Ground Shipping

SOLD - QUINLAN

Lot #4

How about some really nice prop shaft protectors for your outdrives.

These are one of the last things I purchased from our good buddy Fred Cecil at Trick Marine.

Just slip them over your Bravo "XR" or "XZ" prop shafts when the props are off, put the nut on the end and your total protected from all damage and H1N1.

They were either $20.00 each or $25.00 each new and I'll sell you both for $20.00 total + UPS ground shipping.

$20.00 / pair

Great deal

Billet Aluminum - Polish them up and they look great

Lot #5

NEW Dexter hub

Used on 3500 lb axle as used by Myco

Uses LM67048 outer bearing and 25580 inner bearing. Bearings "NOT" included.

$25.00 + UPS Ground Shipping

NEW

6 bolt on 5-1/2 bolt circle

Lot #6

Two Brand NEW 12 inch Kodiak disc brake rotors.

Purchased new from Myco

Used with the above hub and calipers

$65.00 / pair + UPS Ground shipping

Buy all the above brake parts including brake lines and I'll pay the shipping!

Lot #7

Vintage style stainless steel grab handles.

These are really nice. I bought them on e-bay a few years back with the intentions of using them as door handles when building the man cave but it did not work out.

I paid $50.00 for the pair and would like to get my money back.

$50.00 / Pair FREE SHIPPING

FREE SHIPPING

ALREADY SOLD - Irish Tornado


Lot #8


815425T Mercury Sensors

BRAND NEW

For Merc 500 EFI's

Best online price i found was $34.39 each.

I'll sell you both for $40.00 + UPS Ground Shipping

Brand New

SOLD - T500HPS

Lot #9

New 7 pin male plug for trailer lights and electric brakes.

Receiver lock with trailer lock. Used but in excellent condition keyed alike with two keys.

$10.00 FREE SHIPPING

Will that receiver lock fit a 2.5 in like on the F350 15K hitches? Most I found were only long enough to run through a 2 in receiver.

SOLD - CPIEFER06

Lot #10

Brand NEW

Great stuff

Get both for $10.00 FREE SHIPPING

Yes it is 2-3/4 inch between the two end units. I used it on my F350.

Sent you a PM

SOLD - IRISH TORNADO

Lot #11

Mercury 500 EFI plug wire set

Like new used less than 1 hour

New they will cost you $70.00

I'll take $25.00 + UPS Ground Shipping

Lot #12

Pair of end caps off of Mercury Bravo "XZ" drives.

Perfect condition

These are the same as used on the ZR drives also.

They come off the 2002 model known as the original style Bravo "XZ" / "XR" series.

$30.00 for the pair + UPS Ground Shipping

These did not photogragh very well. They look much better in person than in the picture. They are very shiney with no scratches. It is picking up a reflection in the picture.

SOLD - T500HPS

Lot #13

Top cap off original style Mercury Bravo "XR" drive.

Perfect condition with upper bearing, shims and mounting bolts.

$20.00 + UPS Ground Shipping

Like New

Sent you a PM

SOLD...along with the reciever locks (#9)......up to $30 bucks, what else you got!!!! :)

SOLD - SMITTY

Lot #14

Okay here is the deal of the night.

If safety is important to you and failure is not an option then you need these IMCO 5 bolt end caps.

AEC-3 IMCO
AEC-4 IMCO

New they are $266.10 each on the IMCO website.

I used these on Merc XR drives and they are top notch.

I'll take $200.00 total for the pair + UPS Ground Shipping

They are in perfect condition.

IMCO 5 Bolt end caps

10-4

They are yours

Stay tuned I am not even 1/4 the way there yet.

Lot #15

Very nice receiver with pintle style ball hitch.

These are great and add a nice level of safety.

I have used them for years and would not sell this one but I have three and can only use one at a time.

This one has been used but it is in very good condition. It looks much better in person than in the pictures.

Ball 12,000 lb capacity - Pintle is SOLID and rated at 10K lbs

$45.00 + UPS Ground Shipping

P.S. The red tape is to keep it from rubbing the pant off the top of the trailer coupler. It helps

SOLD - QUINLAN

Lot #16

Two hubs for Bravo "XR" / "XZ" outdrives.

These are used but in excellent condition. Complete with all washers and the brass locknuts.

$35.00 for both + UPS Ground Shipping

Great deal

SOLD - WNELLES

PayPal payment received and the cover is boxed up and ready for UPS to pick up on 12-02-09. I pm'd you with the UPS tracking number. Thank you


Lot #17

Full mouring cover for Baja 36 Outlaw

Red in Color

Shark Skin Material

Was $375.00 new

In excellect condition

$200.00 FREE SHIPPING

SOLD - WACONDA


Lot #18

Like new pair of Bravo 1 props

These are 15-1/4, 4-blade stock 32 pitch

one Left Hand
one Right Hand

I bought them brand new this year and used them twice on Lake Norman for testing.

They are perfect and have never been damaged or repaired.

$650.00 / Pair "FREE SHIPPING"

Polish them up and they will look brand new.

SOLD - SMITTY

Lot #19

BRAND NEW

Baja 14 switch master dash panel

BRAND NEW

If you have priced just the switch overs you know they will cost you what I am asking for the entire panel fully wired with the switches.

Need new switch covers?

Need replacement switches?

Need a full panel for a new project?

$150.00 FREE SHIPPING

SOLD - ANCHORMAN

Lot #20

Another BRAND NEW Baja 14 switch master dash panel.

This one is a little shorter than the one listed above and has the switches in a more vertical position where the one able has them more angled.

BRAND NEW

$150.00 FREE SHIPPING

These will not last long.

Price just the switch covers and you will see what a deal this is. If you have the old style switches and want to update here is your chance.

Well that is all I have tonight.

Thanks to you that have already made purchases. I'll post a lot more tomorrow night.

Payment Methods:

I wait for your good check or Postal Money Order
PayPal
Visa
MasterCard
American Express

Thank you for helping me find a home for some good parts.

PM sent.

I will take these Doc

Sorry buddy Quinlan beat you to them.

Anything else you might need?

How about a boat? Motors? Drives? T-Shirts? Old grease? Used oil?
Brake dust?

You are shopping at the right place my friend.

Boat YES
Motors YES
IMCO SCX Drives YES

All the above available in one low $$$ package deal! I'll even throw in a like brand new 2008 custom Myco trailer for free.

T-Shirts, I got them! 100+ all sizes

Funny you should ask about used oil because I have like 10 gallons with your name on them. They are yours FREE!:evilb:

Sorry but I am low on Brake dust but how about a smoking deal on a beautiful V8 Jeep Wrangler?

I had to go back and take a peek!

Looks awesome. Are the trick marine flags still on it?:party-smiley-004:

http://www.offshoreonly.com/forums/a...ject-jeep7.jpg

Only one on the antenna. The others for just for the 4th of July parade.

But hey you have not seen the new "Baja" front seats, steering wheel and console have you? I also have a new dash and full Autometer gauge set that I'm in the process of installing now.

I really do need to sell the Jeep. I have too many toys and not enough time. The wife does not like it because it is hard for her to get up in it and she cannot drive it.

I will probably put the hard top back on it this weekend.

Here are some pictures of the dash and the new gauges. Hopefully I can get that install finished this weekend also.

If you know of anyone looking for a nice Jeep let me know.

1989 Jeep Wrangle YJ
304 V8 with complete CJ7 Drive train
4 Speed Tranny
4:56 Gears
Straight Dual Exhaust
ARB Air Lockers front and rear with onboard compressor
Like brand new 37 Inch Goodyears with matching spare
9000 LB Winch
High Lift Jack

It is not your daily driver but it sure gets a lot of attention everywhere we go.

I'll take $8500.00 cash for it which is a STEAL but it would be worth it to get the wife off my back.

Greg,

Here is the #1 reason she is not happy with the Jeep.

You can never have enough Harley's can you?

LOL

Doc

P.S. That grey thing in the right rear of the picture is the rolling stand and cover for the hardtop and hard doors on the Jeep.

Doc,

Here is another item that should be added to the action, but it would probably sell quicker in the Fountain forums......:evilb:

Greg, Adam, and I all chipped-in and got you a better one. Don't you hate surprises.

XT :eek:

Dock

How much for the Imco back covers and the switch panel together ??

Either way I want the stuff so put my name on it !!!

Smitty 847-774-7182

Thanks !!!!

Not to hi-jack but you might want to list that here.

www.dunebuggy.com

Dave,

Nice to speak with you buddy. Thanks for the order and have a Blessed Thanksgiving.

Mark