They are complete boats Dock. They are just selling them less the power they currently have.
One of the 35's (Red/Gray 525 boat) is the boat Powerboat tested.

Maybe a good deal for someone?

The 35 looks like the one I ran around in the Gulf for 100 hrs of my life.

http://cgi.ebay.com/ebaymotors/2009-...item1c0f0997ce

Q: Hello, I'm currently a BAJA owner and have resently sold a coulpe of my Hot Rods and in the market for a larger boat and this one is very nice. I was courious why the engines are being pulled and the boat is being sold... Continue reading
A: There is no story with any of these boats. They are opportunity buys and the power is still in all boats. We will sell boats with or without power however they will be sold as description reads on EABY without power.... Continue reading

That boat would be a fun boat to dink around with,
if it could be bought right......just set it up like
our boats are set up;)

You can buy these for around 10 grand or maybe under?

FOR SALE:

One pair of naturally aspirated, GM Mark IV, 496 cubic inch stroker motors, freshly built, '0' hours. I will consider reasonable offers so don't be bashful!

SPECS:

GM Mark IV 4-Bolt Main Blocks
GM Rectangular Port 990 Casting "Hi-Perf" Cylinder Heads
Cylinders were Bored Over .060"
Scat 4340 Forged Steel 4.250" Stroke Crankshafts
Scat 4340 Forged Steel 6.385" H-Beam Connecting Rods
JE/SRP Forged 18cc Dome 4.310" Bore Pistons - 9.8:1 CR
Total Seal Classic Race Rings
Clevite77 HP Main & Rod Bearings
Durabond HP Cam Bearings
Manley Severe Duty Valves - 2.250" Intake/1.940" Exhaust
Comp Cams Xtreme Marine XM298H Hydraulic Cam Kits (254/264 Duration - .575/.578 Lift - 112* Separation)
Comp Cams Roller Rockers
Merlin Marine 4150 Intake Manifolds w/Brass Water Jackets
ARP Hardware and Fel-Pro Gaskets Throughout
Melling HV Oil Pumps & Pickups
Milodon Marine Offshore Oil Pans
and so much more that I am forgetting . . .

These were built to be reliable, fire-breathing 600+ HP monsters for my 35' Cigarette Mistress. I bit off more than I could chew with the project, and wound up selling the hull before it was time to reinstall the engines. They made 613TQ/671HP on my desktop dyno!

These are complete from intake to oil pan. Bolt up your accessories and exhaust and go! I have invested much more than what I'm asking, don't miss this opportunity to let my loss be your gain!

Located in South Florida. Worldwide shipping available!

I'm looking to liquidate all of my odds and ends, and purchase a new boat. If you're interested in the motors, I have photos available, so shoot me an email to: [email protected]

Thanks,

Harry

That is what I was thinking, but that "1" is what is next for me......unless that 35 could be bought really cheap, like $40k or less.

But, it's got great colors;)

I hear ya on the "1"



I'm thinking $25 or less......got to save $$$ for the
broken drive club membership:eek:

jason have you been in one yet or at least looked at them they are really nice. I had a 2007 and know have a 2010 35 and it is hands down a lot better built boat.

I like the way you are thinking. $25k for the boat. Fix that broken drive club membership that's another $30k for SCX's. or $45k for Arneson's.
Hmmmmm, wonder what they can be bought for?
I'd trade my 29, less power & a drive swap plus $$ to be determined.