Official Baja Photo Thread
[/IMG]
05-11-2012 | 09:41 PM
#54
Registered
Joined: Feb 2001
Posts: 591
Likes: 7
From: Saugerties, NY
I purchased it without power (spun bearings) so I purchased a crate 454 425 HO. It had gil dry exhaust, I plan I reusing them. I basically have to go over everything. Powder coat exhaust, new transom assembly, K-planes are going on. Rear seat needs to be totally rebuilt. etc. I'm taking lots of pictures. Sanded down the outdrive, etching primer, then epoxy primer than enamel. Just finished that. Hopefully fiberglass work will be complete in a week or 2.
05-11-2012 | 10:35 PM
#55
Registered
Joined: Apr 2010
Posts: 724
Likes: 0
From: Lake Travis
I purchased it without power (spun bearings) so I purchased a crate 454 425 HO. It had gil dry exhaust, I plan I reusing them. I basically have to go over everything. Powder coat exhaust, new transom assembly, K-planes are going on. Rear seat needs to be totally rebuilt. etc. I'm taking lots of pictures. Sanded down the outdrive, etching primer, then epoxy primer than enamel. Just finished that. Hopefully fiberglass work will be complete in a week or 2.
Do you plan on adding stringers or bulkheads? Or doing anything to the cabin?
Last edited by Crossett; 05-11-2012 at 11:10 PM.
