Boat Won't Plane
#11
Platinum Member
Platinum Member
Update:
So I pulled the prop and hub and the hub looks fine, was not broken or rounded out. The local "drive guy" here at the beach said he has seen the rubber / plastic hubs "spin" without breaking under high torque. Make a long story short I bought and installed a solid hub and ran the boat. No blow out no cavitation the boat gets up on plane like it used to. Could the rubber hub get spun like he was saying without breaking ? Should I leave the solid hub in ?
Thanks All
Steve
So I pulled the prop and hub and the hub looks fine, was not broken or rounded out. The local "drive guy" here at the beach said he has seen the rubber / plastic hubs "spin" without breaking under high torque. Make a long story short I bought and installed a solid hub and ran the boat. No blow out no cavitation the boat gets up on plane like it used to. Could the rubber hub get spun like he was saying without breaking ? Should I leave the solid hub in ?
Thanks All
Steve
#13
Update:
So I pulled the prop and hub and the hub looks fine, was not broken or rounded out. The local "drive guy" here at the beach said he has seen the rubber / plastic hubs "spin" without breaking under high torque. Make a long story short I bought and installed a solid hub and ran the boat. No blow out no cavitation the boat gets up on plane like it used to. Could the rubber hub get spun like he was saying without breaking ? Should I leave the solid hub in ?
Thanks All
Steve
So I pulled the prop and hub and the hub looks fine, was not broken or rounded out. The local "drive guy" here at the beach said he has seen the rubber / plastic hubs "spin" without breaking under high torque. Make a long story short I bought and installed a solid hub and ran the boat. No blow out no cavitation the boat gets up on plane like it used to. Could the rubber hub get spun like he was saying without breaking ? Should I leave the solid hub in ?
Thanks All
Steve
#14
Registered
Join Date: Jan 2007
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered
Thread Starter
Join Date: May 2009
Location: Glenwood, Maryland
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Interesting, the hub that came out of my prop was totally plastic / rubber and I have a 496 HO (425 HP) guess the dealer was too cheap to spring for the over 400 HP hub !