Go Back  Offshoreonly.com > Owners Forum > Baja
ok here my dyno numbers >

ok here my dyno numbers

Notices

ok here my dyno numbers

Thread Tools
 
Old 09-12-2010 | 01:17 PM
  #1  
Thread Starter
Registered
15 Year Member
 
Joined: Dec 2007
Posts: 714
Likes: 4
Default ok here my dyno numbers

http://www.youtube.com/watch?v=eL8i0Tnw7Qk how fastdo you think i will go now
bajabob is offline  
Reply
Old 09-12-2010 | 06:34 PM
  #2  
Registered
 
Joined: May 2007
Posts: 56
Likes: 0
Default

what was it before bob?
gsteve is offline  
Reply
Old 09-12-2010 | 06:58 PM
  #3  
Thread Starter
Registered
15 Year Member
 
Joined: Dec 2007
Posts: 714
Likes: 4
Default

hi steve well it they told me 600 then the other guy said 622 his dyno numbers didnt add up so i got to say 600hpthe best i got was runnig 81mph . how did you make out with your boat??????
bajabob is offline  
Reply
Old 09-13-2010 | 04:01 PM
  #4  
AIR TIME's Avatar
Registered
20 Year Member
 
Joined: Dec 2000
Posts: 6,283
Likes: 1
From: EASTON MA.
Default

Originally Posted by bajabob
hi steve well it they told me 600 then the other guy said 622 his dyno numbers didnt add up so i got to say 600hpthe best i got was runnig 81mph . how did you make out with your boat??????
whats the rpms for hp and tq?, if you picked up 80hp should be good for 4 to 6 mph, with the raised propshaft I got 83.2 gps hitting rev with a 26b1 at 6000rpm, never got a chance to try a 28b1. I had 650hp with old carb on dyno new carb was to be good for about 20hp. my tq was 637 4800rpm. so you should end up 85 86 gps I would think, if you have stock prop height your leaving speed on the table.
AIR TIME is offline  
Reply
Old 09-13-2010 | 06:30 PM
  #5  
Thread Starter
Registered
15 Year Member
 
Joined: Dec 2007
Posts: 714
Likes: 4
Default

Originally Posted by AIR TIME
whats the rpms for hp and tq?, if you picked up 80hp should be good for 4 to 6 mph, with the raised propshaft I got 83.2 gps hitting rev with a 26b1 at 6000rpm, never got a chance to try a 28b1. I had 650hp with old carb on dyno new carb was to be good for about 20hp. my tq was 637 4800rpm. so you should end up 85 86 gps I would think, if you have stock prop height your leaving speed on the table.
finally run 34deg. 680 tq with 718hp
bajabob is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.