my transducer is flooping around back there in that area i wonder if thats where mine was from the factory the glue came off the puck and the fiberglass it was floating around the bilge been like that since i got the boat last year

There should be a place on the bottom of the hull where there is no coring. It will be concaved out, that is where you should mount the transceiver. I used 4200 when I did mine last year.

I would think all 25 Outlaws were very similar in the location of the puck. If you can reach it and its dry, 4200 it in.

well if anyone needs a brand new angled puck XAP 9 20 humminbird shoot thru http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT