is 23 outlaw with MAG really a 70mph boat?
05-16-2011 | 07:13 PM
#34
Gold Member
Joined: Oct 2000
Posts: 5,664
Likes: 140
From: Hollywood, MD, USA
Well it could have been 8% with a 1.36 gear @ 4800 rpm's, But dosen't the 496MAG make the most power @ 4700 rpm's? And where is the rev limiter on a 496MAG?
And with a 1,5 gear @ 4800 rpm's -2%. There it is, that magical negative slip again.
Sorry but I call
on that one. Maybe on the trailer.
And with a 1,5 gear @ 4800 rpm's -2%. There it is, that magical negative slip again.
Sorry but I call
on that one. Maybe on the trailer.
05-16-2011 | 07:27 PM
#35
VIP Member
Joined: Nov 2009
Posts: 1,520
Likes: 1
From: Ohio
ok what does everyone think a 98 272 with a fresh 500 efi will run and what prop should be best ??
__________________
www.bajaboatowners.com
www.bajaboatowners.com
05-16-2011 | 08:06 PM
#37
Registered
Joined: Dec 2002
Posts: 6,636
Likes: 0
From: Bucyrus, Ohio
05-16-2011 | 08:21 PM
#38
VIP Member
Joined: Nov 2009
Posts: 1,520
Likes: 1
From: Ohio
dont really think 82 is going to be even close but it better be well above the 34.5
__________________
www.bajaboatowners.com
www.bajaboatowners.com
Last edited by Ebay Ed; 05-16-2011 at 08:24 PM.
05-16-2011 | 08:23 PM
#39
VIP Member
Joined: Nov 2009
Posts: 1,520
Likes: 1
From: Ohio
i talked to brett and he said probably the stock 23p but it just seems like it would need more pitch but to be honest i dont have a clue
__________________
www.bajaboatowners.com
www.bajaboatowners.com
05-16-2011 | 08:48 PM
#40
Registered
Joined: Apr 2005
Posts: 2,957
Likes: 1
From: www.bajaboatowners.com
