Notices

25 ol

Thread Tools
 
Old 06-21-2011 | 07:04 AM
  #11  
Registered
 
Joined: Apr 2009
Posts: 242
Likes: 0
From: Omaha, NE
Default

I am running a 24 + 4 labbed prop and stock 502 Mag . I bump 5200 rpm and run mid to low 60's
baja_brian is offline  
Reply
Old 06-21-2011 | 08:04 AM
  #12  
Registered
 
Joined: Apr 2009
Posts: 1,852
Likes: 1
From: Denmark and hopefully some place nice
Default

Originally Posted by mikeoutlaw24
450 hp
25 M+.
A.O. Razor is offline  
Reply
Old 06-21-2011 | 08:08 AM
  #13  
Registered
 
Joined: Apr 2009
Posts: 1,852
Likes: 1
From: Denmark and hopefully some place nice
Default

Originally Posted by baja_brian
I am running a 24 + 4 labbed prop and stock 502 Mag . I bump 5200 rpm and run mid to low 60's
Sounds like the wrong prop. Your slip is too high, 20%+ especially for a 4 blade with the deep drive on the 24OL. Should run 66+ with a 23" 3 blade.
A.O. Razor is offline  
Reply
Old 06-21-2011 | 12:32 PM
  #14  
VP of the tickfaw200
15 Year Member
 
Joined: Jul 2007
Posts: 2,126
Likes: 185
From: baton rouge, louisiana
Default

have a 25' with a 502... running a 23p m+ labbed by bblades it was dead on call them and let them do it. also have a 22p bravo 1 4 blade with some cup added and and hate the prop!
caseyh is offline  
Reply
Old 06-21-2011 | 12:38 PM
  #15  
Registered
 
Joined: Oct 2006
Posts: 1,449
Likes: 0
From: Michigan
Default

Originally Posted by mikeoutlaw24
what speed should i get out of this boat with the 502

Expect to see 65-67MPH GPS
Baja_man is offline  
Reply
Old 06-21-2011 | 10:17 PM
  #16  
mpally's Avatar
Registered
 
Joined: Oct 2000
Posts: 1,371
Likes: 0
From: St. Louis/ LOTO
Default

Originally Posted by caseyh
have a 25' with a 502... running a 23p m+ labbed by bblades it was dead on call them and let them do it.
If his 502 is making 450 hp, he will probably need a bigger wheel than a 23.
mpally is offline  
Reply
Old 06-22-2011 | 04:02 PM
  #17  
Registered
 
Joined: Apr 2009
Posts: 1,852
Likes: 1
From: Denmark and hopefully some place nice
Default

Originally Posted by mpally
If his 502 is making 450 hp, he will probably need a bigger wheel than a 23.
+1
25"
A.O. Razor is offline  
Reply
Old 06-22-2011 | 09:06 PM
  #18  
Registered
15 Year Member
 
Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
Default

Casey! Why do you hate the b1???

I have a 22 b1 repitched to 23 with cup and runs well, could use some more cup to get bow higher but gets boat up well??? Was worried that the lab bed 23 wouldn't help whole shot cause I don't like to "have" to use tabs to get up with load??
nailit is offline  
Reply
Old 06-23-2011 | 06:35 PM
  #19  
Registered
15 Year Member
 
Joined: Jul 2007
Posts: 93
Likes: 0
From: Peru, ny
Default

Try a rev 4 23p...its a smaller diam prop than the bravo..thats what im running on mine with the same hp...awsome prop
dieselstrng is offline  
Reply
Old 06-23-2011 | 07:57 PM
  #20  
mpally's Avatar
Registered
 
Joined: Oct 2000
Posts: 1,371
Likes: 0
From: St. Louis/ LOTO
Default

We preferred a 22 Bravo over the 23 Mirage on our 25. The 23 would break loose in rough water and would bit again until we came off plane.
mpally is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.