29 outlaw with twin 7.4 vs. Twin sbc

Reply Subscribe

Thread Tools

08-12-2011 | 09:59 PM

#11

jmeng

Registered

Joined: Apr 2001

Posts: 2,794

Likes: 1

From: Baton Rouge, LA

Quote:

Originally Posted by Teo

I guess it was the 454 mag with 365 hp then. The 7.4MPI 310 hp does´nt turn 25´s.

Nope. Carburated 300 horsepower 7.4s.

08-12-2011 | 10:01 PM

#12

jmeng

Registered

Joined: Apr 2001

Posts: 2,794

Likes: 1

From: Baton Rouge, LA

Quote:

Originally Posted by A.O. Razor

You should try a set of Revolution4 25". More bowlift. Remember your 26" B1's are more like 25's, and run flatter than Rev4's and M+'s. 15,25" dia. is also alot of prop to turn with the mild power of the 496MAG's.

Never thought about Rev4's. Might have to find a set to try. I'd actually like to go up a little in pitch. Even in the summer I can get on the rev limiter.

08-13-2011 | 08:03 AM

#13

A.O. Razor

Registered

Joined: Apr 2009

Posts: 1,852

Likes: 1

From: Denmark and hopefully some place nice

Quote:

Originally Posted by jmeng

Never thought about Rev4's. Might have to find a set to try. I'd actually like to go up a little in pitch. Even in the summer I can get on the rev limiter.

If you are close to the limiter with the B1's, you will surely be on them with the Rev4's. You can have them made into 26's.
You sould also try a set M+ 27"'s. Have shown to be good props on the OL's with lots of bowlift. I'll bet you they will be the fastest and in 27" they should have a good midrange as well.