Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   looking for a OL 29 or 33 (https://www.offshoreonly.com/forums/baja/261462-looking-ol-29-33-a.html)

Baja_342 10-14-2011 08:14 AM

I've owned both a 302 and 29 OL. The 302 will have quite a bit more room than the 29 between the bolsters and bench. I don't recall any differences in the v births.

kragar 10-14-2011 08:45 AM


Originally Posted by Baja_302 (Post 3527183)
I've owned both a 302 and 29 OL. The 302 will have quite a bit more room than the 29 between the bolsters and bench. I don't recall any differences in the v births.

length for length they are the same correct? So the 29 must something larger like the rear sunpad and more room down below?

XT-Innovator 10-14-2011 12:20 PM

The v-births, and engine compartments are the same. The cockpit in the 302 is about a foot longer, and is a foot shorter than the 29ol between the doorway, and main bulkhead at the v-birth. The rear hanging closets in the 29ol is the extra space.

XT

kragar 10-14-2011 12:50 PM


Originally Posted by XT-Innovator (Post 3527397)
The v-births, and engine compartments are the same. The cockpit in the 302 is about a foot longer, and is a foot shorter than the 29ol between the doorway, and main bulkhead at the v-birth. The rear hanging closets in the 29ol is the extra space.

XT

XT any guess what a 29 will run with 500 carbed motors? it runs 26 4 blades

JaayTeee 10-14-2011 01:41 PM


Originally Posted by kragar (Post 3527419)
XT any guess what a 29 will run with 500 carbed motors? it runs 26 4 blades


It must have 1.36 ratio drives then....I ran 30's on mine.

Mine ran low 80's

XT-Innovator 10-14-2011 01:51 PM


Originally Posted by kragar (Post 3527419)
XT any guess what a 29 will run with 500 carbed motors? it runs 26 4 blades

Was never on one with 500's, just 7.4's and 454 MPI's. Oh I did drive one with Scorpions that ran 68-69.

outlawfun 10-18-2011 07:45 PM

Krager, sent you a reply if you don't get it my # is 617-895-8606. I'm not in front of computer to often.

JasonSmith 10-18-2011 08:27 PM

Whatever you decide, if it is a 29 Outlaw, remember they respond VERY well to extension boxes & -2 or pre-2000's boats like mine, -3" lowers.
Mike Bandy & myself have already spent the money on our boats to know what works & doesn't work so well on the 29 Outlaw.
I'll tell you everything you ever wanted to know about my setup and Mike surely will do the same.

kragar 10-18-2011 09:44 PM

thanks jason. Finding one with 500s is just a bonus to me. I really dont care to run 80 but it will be nice to cruise at 70 and still have some left. What should the 500 hp carbed run for rpm? 5000?

Irishtornado 10-18-2011 11:32 PM


Originally Posted by kragar (Post 3530928)
thanks jason. Finding one with 500s is just a bonus to me. I really dont care to run 80 but it will be nice to cruise at 70 and still have some left. What should the 500 hp carbed run for rpm? 5000?

Prop it to run 5300 the rev limiter on the HP500 is 5400 at least on the 500EFI it is. I've bumped mine to 5600 and propped it to run 5400 it's running a solid 83mph on GPS. Mine is fully loaded with all options.


All times are GMT -5. The time now is 09:44 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.