![]() |
Would have loved to see video of that! Sounds like a Helluva a race. The 36 must have been making some serious steam to run that kinda MPH! Although, he was probably just as suprised as you where when you where still beside him at 90+!
XT, I believe this boat has the cabin you where referring too? http://www.offshoreonly.com/classifi...o40419-en.html |
Originally Posted by Smitty
(Post 3522958)
I can tell you that boat had to have the bare bones cabin and at least 900 per side to run into the 90's. And somebody spent some time dialing that thing in for sure.
|
Originally Posted by n20michael
(Post 3523001)
Would have loved to see video of that! Sounds like a Helluva a race. The 36 must have been making some serious steam to run that kinda MPH! Although, he was probably just as suprised as you where when you where still beside him at 90+!
XT, I believe this boat has the cabin you where referring too? http://www.offshoreonly.com/classifi...o40419-en.html |
There was a guy on here a few years back that went by Drill it.As I remember correctly he had 605ci Lingenfelter motors in it,and he ran in the 90's.
|
Originally Posted by JasonSmith
(Post 3522714)
Dock's 36 barely saw 90 with the big power in it.
|
Originally Posted by BURNSMAZZ
(Post 3523122)
There was a guy on here a few years back that went by Drill it.As I remember correctly he had 605ci Lingenfelter motors in it,and he ran in the 90's.
http://www.offshoreonly.com/forums/b...ml#post3523142 "I have a 99 36 with twin 605 ci. John Lingenfelter built 750hp engines. I am running Imco Extreme Sc drives that are 2 1/2 inches shorter than stock on Land & Sea 8" extension boxes with Herring 6-Blades. Best speed to date is 95 GOS and 96 speedo in fresh water (Lake Huron). This was done in September on a 72 degree day with a two foot shop. The boat will run 92 in dead flat water. Let me know how yours runs with the whipples. I am curious to see what kind of speed you get out of it. It took me a few years to dial mine in to where I am today." "I do most of my boating in Port Huron but I do get down that way a few times a year. Do you also have a 36?" Drill It |
Originally Posted by articfriends
(Post 3523144)
Found him, I see mention of his boat in this other thread too, Smitty
http://www.offshoreonly.com/forums/b...ml#post3523142 "I have a 99 36 with twin 605 ci. John Lingenfelter built 750hp engines. I am running Imco Extreme Sc drives that are 2 1/2 inches shorter than stock on Land & Sea 8" extension boxes with Herring 6-Blades. Best speed to date is 95 GOS and 96 speedo in fresh water (Lake Huron). This was done in September on a 72 degree day with a two foot shop. The boat will run 92 in dead flat water. Let me know how yours runs with the whipples. I am curious to see what kind of speed you get out of it. It took me a few years to dial mine in to where I am today." "I do most of my boating in Port Huron but I do get down that way a few times a year. Do you also have a 36?" Drill It |
Speed in in the setup. How many times have you, JT, Bobby & I discussed this Smitty? Hundreds!
|
Originally Posted by JasonSmith
(Post 3523265)
Speed in in the setup. How many times have you, JT, Bobby & I discussed this Smitty? Hundreds!
|
Lingenfelter used to make some killer stuff, nice fella too, shame what happened to him )-:
Michael |
| All times are GMT -5. The time now is 05:27 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.