Originally Posted by IN25Outlaw (Post 3692150)

Not sure what is funny. Does your speedometer go up before rpm's? I will make a better video. The boat is a rocket out of the hole and thought I would share video.

Originally Posted by WildRooster (Post 3690420)

That speedo is shooting up way fast.....QUOTE]

That is point of video haha. Need better camera, but that is Livorsi tattletale GPS speedo. Engine is 540 cubic inch running 7 lbs of boost on m1 procharger. Dynoed at 800hp/800tq. Running good, but going to try some different props this weekend. I think I will see 90, but don't want to sacrifice too much midrange. It is really fun from 30-85!

Originally Posted by blaquebaja (Post 3692190)

Can you post some pics of your engine and outdrive set up. I also have 1998 25 Outlaw. I have a stock 502 that needs to be rebuilt. I`m hoping for 600 hp 600 tq from a 509. Hoping for 75-80 mph.

Originally Posted by indywhsle (Post 3692218)

I am not questioning you at all. I had a 272 with a m3 procharger on a 502 and it was a rocket also. As far as the speedo, mine broke and I now have a digital gps and it starts reading instantly. I see you are in IN. Where do you boat? Maybe would could meet up sometime.

Originally Posted by IN25Outlaw (Post 3692230)

10-4 thought you were questioning also haha. I boat on Morse a lot out of convenience, but also go to Monroe. Usually get down to Dale Hollow and Cumberland a couple times a year.

Originally Posted by blaquebaja (Post 3692190)

I`m hoping for 600 hp 600 tq from a 509. Hoping for 75-80 mph.

Originally Posted by indywhsle (Post 3692225)

Here is what mine was. It made 724 hp and 774 ft-lb torque.

Originally Posted by IN25Outlaw (Post 3690186)

Video of getting to 80 pretty quick in 04 25 outlaw. Ran 85 with 4 guys and topped off with fuel. Have labbed 33 4 blade and need to go up. http://youtu.be/Cl_zhBEnps8