Baja thru hull manufacturer?
06-11-2012 | 07:19 PM
#1
Thread Starter
Registered
Joined: Sep 2009
Posts: 534
Likes: 0
From: Clarence, NY
Baja thru hull manufacturer?
Anybody know who made the thru hull that's used on 30 outlaws for draining the anchor locker? It's a hooded thru hull, relatively small and isplumbed to the anchor locker "bucket"
06-12-2012 | 08:56 AM
#3
Custom Interiors & More
Joined: Jun 2008
Posts: 1,742
Likes: 2
From: Bucyrus, OH.
Allot of Perko and Attwood on older Baja's, but I switched over to Orcas Marine on the newer models for hardware like the "pop-up" fuel fills. Orcas was later purchased by Southco.
http://www.southco.com/product/part....=m7-16-9004267
XT
http://www.southco.com/product/part....=m7-16-9004267
XT
06-12-2012 | 11:44 AM
#4
Registered
Joined: May 2012
Posts: 68
Likes: 0
From: Huntsville, Al.
Allot of Perko and Attwood on older Baja's, but I switched over to Orcas Marine on the newer models for hardware like the "pop-up" fuel fills. Orcas was later purchased by Southco.
http://www.southco.com/product/part....=m7-16-9004267
http://www.southco.com/product/part....=m7-16-9004267
