Mine came new with 25 Mirage 3 blades. Mirage Plus did not work as well on my boat (330's)

I have not been able to run mine WOT but it has gen IV 454 mags in it and it came with 23P Mirage props. How was the boat getting up on plane with the 25's and a full load?

It tore out of the hole incredibly well. I usually ran with a light load. WOT rpm's were 4600.

Ran across one of these boats earlier in the week for sale. Engines are gone, drives are gone, and the interior needs completely redone. The rest is solid and all there. ANybody got a ballpark number as to what this boats worth?

I bought mine in long island from a lady who's husband died. She had two mechanics verify that the motors were bad. They were just hydro locked. I paid 2500 for the boat with a full cover counter rotating bravo drives lift kept buoys ropes 2 anchors and 8 life jackets with immaculate service records. Boat has one scratch on it. But no trailer. Have the original carpet for cockpit area as well. I think I made out okay. I paid 2800 for a tri axle steel trailer. So I'm at 5300 for a clean boat with two bad motors.

Thats one hell of a deal!!! The one I am lookin at needs alot of cosmetic work and money put into the interior and it needs motors, drives. Plus i'm sure it will need some other small things since the motors and drives are gone. This guy is wanting 1000 without trailer.
Thanks for the comparison.

I would not pay much for a boat with out motors or drives. Your going to have more in it getting motors and drives than it is worth.

http://i282.photobucket.com/albums/k...43627667_o.jpg

This is mine, I am thankful for what I got. This boat is clean.

ditch the mirage props and go with Bravo's, may lose a few MPH on top end, but the Bajabounce will be gone.

I ran Mirage 3 blades 25p on my 1988 Baja 280 had 454 (330's) it always got out of the hole great! no matter what load I had on board. top end was about 63 cant remember the RPM I think low though around 4k.