|
You can try this it is what i used on mine seemed to work great http://www.safewaytraction.com/Safet...onSlipTape.htm 3500 safe track
|
Originally Posted by 33outlawsst
(Post 3810328)
Dave, said Taco Marine, will see if he comes up with anything else :flag:
I just put one of the old style platforms on a 220 Sport and I painted the platform with Black bedliner paint. The rubber inserts had shrunk-up but I ran a bead of black silicone in the channel, then I pushed in about 8" of rubber insert and taped it in place with Duck Tape. Then I streched it across the entire span pushing it in the wet silicone and taped it in place. Even put some sealer at the ends, and it turned out great! XT |
Originally Posted by Smitty
(Post 3810554)
After I had mine powder coated, I found a roll of black 3M vinyl antislip on the internet. I think it is 3/4" wide ??
I will check tomorrow in my shop to see if there is a 3M number on the roll. Smitty I'm not sure how you put the stick on non-slip. Yours should have had the slot in the top for the rubber insert. Did you just apply over that slot? Did you fill the slot in first to keep water out? Any photos? Thanks, Mike |
Originally Posted by XT-Innovator
(Post 3812309)
Taco was the only source that I knew of that made it.
I just put one of the old style platforms on a 220 Sport and I painted the platform with Black bedliner paint. The rubber inserts had shrunk-up but I ran a bead of black silicone in the channel, then I pushed in about 8" of rubber insert and taped it in place with Duck Tape. Then I streched it across the entire span pushing it in the wet silicone and taped it in place. Even put some sealer at the ends, and it turned out great! XT So did you reuse the old rubber inserts by stretching them and holding them in place with the silicone? HotTub |
Yep, I think I took some photos?
|
1 Attachment(s)
Still looking, if I cant find it, Im going to try Daves suggestion, mine just needs to be streached about 4 inches, aaahhh that didnt sound rigt.
I guess this is 4 rib ? |
sold
|
sold
|
4 rib I guess
2 Attachment(s)
here's a pic
|
I've got it baby, I'm trying to figure out how to add pics
|
| All times are GMT -5. The time now is 12:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.