Any info on this 33 outlaw?
#1
Thread Starter
Registered
Joined: Apr 2010
Posts: 895
Likes: 0
From: Pearland, TX
Just saw they made a major reduction in price. Im sure it's rough just wondering if anyone knew how rough?
http://www.boattrader.com/listing/19...tlaw-101789116
http://www.boattrader.com/listing/19...tlaw-101789116
#2
Registered

Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
I called about it!!
Sales guy said they had engine codes and the cockpit floor had bounce to it.. Whoever did the vinyl also did a crap job.
Thats as far as I went with it.. Figured if they didn't take care of the vinyl, the engines might not be good either! Add Saltwater to it and thats just the beginning.
I really didn't look much farther into it..
I have a friend that bought a boat from Tampa and he has electrical problems constantly( every year)?? Coincidence??
Let me know what you find out.. just curious!
Sales guy said they had engine codes and the cockpit floor had bounce to it.. Whoever did the vinyl also did a crap job.
Thats as far as I went with it.. Figured if they didn't take care of the vinyl, the engines might not be good either! Add Saltwater to it and thats just the beginning.
I really didn't look much farther into it..
I have a friend that bought a boat from Tampa and he has electrical problems constantly( every year)?? Coincidence??
Let me know what you find out.. just curious!
#3
Gold Member

Joined: Jul 2008
Posts: 3,748
Likes: 869
From: Delray Beach, FL
Define bounce? Did he mean cockpit or cuddy? Bounce in the cockpit is semi normal. It cant rot, they used Polypropelene core, there isnt wood in my floor panels...
Its a nice boat without crazy graphics.
Its a nice boat without crazy graphics.
#4
Registered

Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
Thats was sales guy texted me.. assumed he meant it was weak? i.e. support cracked on bottom. could probably be easy fix to reglass since its removalable! (cockpit)
#6
Registered

Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
nope.. I really didn't dig too much b/c they also told me they didn't accept trades on a brokerage boat.
he did say code"S" and that the service department was supposed to look at and get price for owner.
he did say code"S" and that the service department was supposed to look at and get price for owner.
#7
Registered
Joined: Jul 2006
Posts: 2,034
Likes: 1
From: Oshawa, Ontario, Canada
Sounds like its pretty beat, I would pass, unless you got it cheap enough to offset the potential problems. Hull looks pretty good, but the rest needs TLC
I think this might have been on EBay awhile back? I could be wrong.
I think this might have been on EBay awhile back? I could be wrong.
#8
Registered
Joined: Oct 2004
Posts: 620
Likes: 0
From: Cincinnati, Ohio
OMG!!!May as well factor in 5k+ to do the interior, find out who hacked that job and let us know just so none of us goes there for interior!!! LOL And those panels are just as hidious!!!!!! Just Sayin!!
#10
Thread Starter
Registered
Joined: Apr 2010
Posts: 895
Likes: 0
From: Pearland, TX
Ya the panels suck, gauges suck, said the rear hatch needed to be done and the code was a air temp sensor? I feel like I saw it on eBay a few years back too. On a positive note it's not pink and teal!


