Bezels for faria gauges
 

I have 2001 Hammer I'd like to put bezels on the faria gauges. If I'm measuring gauges right they are 2 1/4 (gas,oil....)and 3 3/4 (tach and speedo). Was wandering if anybody had put bezels on faria gauges and if those measurements seem right? Thanks

yes they are the standard size gauges. look at places like rex marine, harden marine, cp performance, etc etc there are many others that sell them. You can get em painted, anodized, chromed, black chromed and a powder coated.

Thanks, I'm thinking bout going with Dana marine since I'm gonna do cup holders also. I won't have to do any trimming for the cup holders with theirs. Thanks again

When I had my 91 260, I put bezels on my Faria Guages. Standard sizes are 2 1/16 for the smaller and 3 3/8 for the tach and speedo. A great upgrade.

Going with Livorsi slim line bezels. The gauges on the Hammer are only a half inch and less apart from each other. They will be about 1/4 inch bigger than the gauges (1/8 per side). Hopefully big enough to make a difference. Thanks for the help

That is correct standard measurement.

Don't forget the ignition switch bezel. Cheap nice little touch.