Bezels for faria gauges
#1
Registered
Thread Starter
Join Date: May 2013
Location: Indiana
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Bezels for faria gauges
I have 2001 Hammer I'd like to put bezels on the faria gauges. If I'm measuring gauges right they are 2 1/4 (gas,oil....)and 3 3/4 (tach and speedo). Was wandering if anybody had put bezels on faria gauges and if those measurements seem right? Thanks
#2
Registered
Join Date: Mar 2012
Location: Syracuse, NY
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
yes they are the standard size gauges. look at places like rex marine, harden marine, cp performance, etc etc there are many others that sell them. You can get em painted, anodized, chromed, black chromed and a powder coated.
#3
Registered
Thread Starter
Join Date: May 2013
Location: Indiana
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I'm thinking bout going with Dana marine since I'm gonna do cup holders also. I won't have to do any trimming for the cup holders with theirs. Thanks again
#5
Registered
Thread Starter
Join Date: May 2013
Location: Indiana
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Going with Livorsi slim line bezels. The gauges on the Hammer are only a half inch and less apart from each other. They will be about 1/4 inch bigger than the gauges (1/8 per side). Hopefully big enough to make a difference. Thanks for the help