Trailer trim on 33 Outlaw
#12
Platinum Member
Platinum Member
The tie bar prevents translational motion between the two drives, in other words closer or further apart from eachother. However the ends are free to rotate, so the elevation between the two can change. The greater the difference, though, the closer the two drives become.
#15
Registered
Thread Starter
Join Date: Apr 2002
Location: Boca Raton, FL
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
BTW,
Thanks guys .. this is what makes this forum great!
After thinking about this, I seem to recall that on my 25 I had to use both the trim switch and the trailer switch at the same time.
I had the Sonic in between (momentary indescretion) which only had a single switch.
I'll give it a try tomorrow.
Thanks guys .. this is what makes this forum great!
After thinking about this, I seem to recall that on my 25 I had to use both the trim switch and the trailer switch at the same time.
I had the Sonic in between (momentary indescretion) which only had a single switch.
I'll give it a try tomorrow.
#16
Registered
Originally posted by jawbreakerkid
it is a winterization tag....LOL here is the whole pic...
it is a winterization tag....LOL here is the whole pic...
Thread
Thread Starter
Forum
Replies
Last Post
PurpleStuff
Trucks, Trailers and Transportation
2
06-21-2007 08:02 PM
Ran-Dom 32
Trucks, Trailers and Transportation
1
03-17-2005 08:54 PM