33 Outlaw cockpit update
04-22-2017 | 07:21 PM
#52
Thread Starter
Registered
Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
Added some bump!! Had a 12" in the cuddy compartment, but added 2 10"s in the bench! I need to fine tune it, but it sound good! I think I need to add some tweeters to the passenger and helm sides. Those speakers are so damn low, the seat blocks most of my sound.
[ATTACH=CONFIG]566706[/ATTACH]
[ATTACH=CONFIG]566706[/ATTACH]
04-24-2017 | 11:02 AM
#54
Registered
Joined: Mar 2012
Posts: 1,230
Likes: 27
From: Clearwater, Mn
12-25-2017 | 05:11 PM
#57
Thread Starter
Registered
Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
Well, I cleaned up the whole deck, then applied white vinyl from the windscreen edge to the bow cleats. THen I had to buff the crap out of the Port side to match. Can barely tell the difference in the sun.
12-26-2017 | 10:39 AM
#58
Registered
Joined: Aug 2001
Posts: 14,571
Likes: 4,541
From: Channel Islands, So. Cal.
12-26-2017 | 11:12 AM
#59
Thread Starter
Registered
Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
Sanding it down well and the self etching is the key to getting it to stick. All in the prep as they say.
12-26-2017 | 01:18 PM
#60
Registered
Joined: Aug 2001
Posts: 14,571
Likes: 4,541
From: Channel Islands, So. Cal.
yes, I just used rustoleum gloss paint. I actually sanded it down pretty well till I got to mostly aluminum, then sprayed with self-etching primer to get it to stick.
Sanding it down well and the self etching is the key to getting it to stick. All in the prep as they say.
Sanding it down well and the self etching is the key to getting it to stick. All in the prep as they say.
