1998 33 Outlaw Issues?
#12
Thread Starter
Registered

Joined: Mar 2003
Posts: 1,545
Likes: 89
From: Smith Valley, NV
This one has the school bus seating.
Can't imagine working on it would be any worse than my 29 Outlaw with 7.4's would be. My 29 ran 65 with the 7.4 MPI's (in the ocean).
This one has 830 hours on it so I'm a little concerned about that. It is priced REALLY right though so I'd have plenty of $ left over for rebuilds or replace. I'd want to upgrade power either way. Looking for 80 MPH target speed so would 500HP per side get me there?
Can't imagine working on it would be any worse than my 29 Outlaw with 7.4's would be. My 29 ran 65 with the 7.4 MPI's (in the ocean).
This one has 830 hours on it so I'm a little concerned about that. It is priced REALLY right though so I'd have plenty of $ left over for rebuilds or replace. I'd want to upgrade power either way. Looking for 80 MPH target speed so would 500HP per side get me there?
#13
Registered

Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
Make sure it's surveyed with moisture meter, engines scanned, etc. Mine had new motors, was stored in dry storage, and had alum trailer. Other than the lt green, pink and teal, the only issue I had was my boat was never brought in for the recall on the cockpit scupper drains that drained out the side. A lil rough sitting and it would let a Iil water back in the boat. I plugged them and re- gelled.
Speed should be low 60s depending on conditions... Humidity, heat, etc.
Mine ran 68 in VA and will run 65 light here in hot a$$ New Orleans. 454 mag mpi's.
What price range is it listed. Pm me and I will let you know what I paid 3 years a go for mine.
Other than that, we LOVE it! Oh, and I can change impellers in about 45 min each.
[ATTACH=CONFIG]549352[/ATTACH]
Speed should be low 60s depending on conditions... Humidity, heat, etc.
Mine ran 68 in VA and will run 65 light here in hot a$$ New Orleans. 454 mag mpi's.
What price range is it listed. Pm me and I will let you know what I paid 3 years a go for mine.
Other than that, we LOVE it! Oh, and I can change impellers in about 45 min each.
[ATTACH=CONFIG]549352[/ATTACH]
Last edited by nailit; 01-04-2016 at 10:19 PM.
#14
Registered

Joined: Oct 2008
Posts: 1,689
Likes: 115
From: Slidell, La.
This one has the school bus seating.
Can't imagine working on it would be any worse than my 29 Outlaw with 7.4's would be. My 29 ran 65 with the 7.4 MPI's (in the ocean).
This one has 830 hours on it so I'm a little concerned about that. It is priced REALLY right though so I'd have plenty of $ left over for rebuilds or replace. I'd want to upgrade power either way. Looking for 80 MPH target speed so would 500HP per side get me there?
Can't imagine working on it would be any worse than my 29 Outlaw with 7.4's would be. My 29 ran 65 with the 7.4 MPI's (in the ocean).
This one has 830 hours on it so I'm a little concerned about that. It is priced REALLY right though so I'd have plenty of $ left over for rebuilds or replace. I'd want to upgrade power either way. Looking for 80 MPH target speed so would 500HP per side get me there?
Maybe OffshoreExcursion or others who have repowered and ran above 80-90 may have a better estimate but they were 02' + so they had the higher X already when they started.
#16
This one has the school bus seating.
Can't imagine working on it would be any worse than my 29 Outlaw with 7.4's would be. My 29 ran 65 with the 7.4 MPI's (in the ocean).
This one has 830 hours on it so I'm a little concerned about that. It is priced REALLY right though so I'd have plenty of $ left over for rebuilds or replace. I'd want to upgrade power either way. Looking for 80 MPH target speed so would 500HP per side get me there?
Can't imagine working on it would be any worse than my 29 Outlaw with 7.4's would be. My 29 ran 65 with the 7.4 MPI's (in the ocean).
This one has 830 hours on it so I'm a little concerned about that. It is priced REALLY right though so I'd have plenty of $ left over for rebuilds or replace. I'd want to upgrade power either way. Looking for 80 MPH target speed so would 500HP per side get me there?
#19
Thread Starter
Registered

Joined: Mar 2003
Posts: 1,545
Likes: 89
From: Smith Valley, NV
#20
Thread Starter
Registered

Joined: Mar 2003
Posts: 1,545
Likes: 89
From: Smith Valley, NV
Plus, if I buy this boat I wouldn't have to buy a new hat (or change my screen name)!

Last edited by BajaFresh; 01-05-2016 at 07:52 PM.




