Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   700sci in outlaw 25 (https://www.offshoreonly.com/forums/baja/343080-700sci-outlaw-25-a.html)

Kefurr 12-18-2016 12:21 PM

Not sure how much if any space difference there is between a 25 and 26 Outlaw
Baja did build at least one (and I believe only one) 26 with a 600sci and everything cleared

IGetWet 12-18-2016 01:08 PM

Wild card had a 600sci in his. The 700 is only 3/4" taller. I was also wondering how loud the blower would be in that boat.

JaayTeee 12-18-2016 02:09 PM


Originally Posted by IGetWet (Post 4510770)
Wild card had a 600sci in his. The 700 is only 3/4" taller. I was also wondering how loud the blower would be in that boat.

The whine starts around 4000 rpm.... I actually like it ;)

IGetWet 12-18-2016 04:32 PM

Fine whine right?

JerseyOutlaw 12-18-2016 05:20 PM

525sc fits, blower belt is 1 inch from the rear bench and hatch is fine. My digital GPS read by the 10th mph, runs the fastest with a lot of trim
www.youtube.com/watch?v=1PU47GWhypA

IGetWet 12-19-2016 11:56 AM

Say a guy we're to be crazy enough to drop a 700sci in a boat with a typical loaded weight of roughly 5800lbs, how long would a bravo X upper and lower stand up to that kind of power if not driven like a jet ski? What about a XR?

JaayTeee 12-19-2016 12:45 PM


Originally Posted by IGetWet (Post 4511015)
Say a guy we're to be crazy enough to drop a 700sci in a boat with a typical loaded weight of roughly 5800lbs, how long would a bravo X upper and lower stand up to that kind of power if not driven like a jet ski? What about a XR?

if the X breaks, skip the XR and go to an SCX

TBAG 12-19-2016 01:22 PM

I hope OP does this........

IGetWet 02-08-2017 08:01 AM

I got a Merc 525 with a Whipple that will be going into my 25 OL. I'll probably start a thread for advice on plumbing and other things I'm not an expert with. Stay tuned.

http://i1098.photobucket.com/albums/...EDB0BECBA9.jpg

airjunky 02-08-2017 12:48 PM

Intercooled whipple with aluminum heads at that
That should be quite a runner there


All times are GMT -5. The time now is 08:26 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.