Offshoreonly.com - Hole where transducer sits

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Baja (https://www.offshoreonly.com/forums/baja-31/)

- - Hole where transducer sits (https://www.offshoreonly.com/forums/baja/360617-hole-where-transducer-sits.html)

202 islander

05-16-2019 10:52 PM

Quote:

Originally Posted by 30outlaw (Post 4687261)

Interesting, the 30 has two drain plugs, and both are well below the liner

I wish mine was like that !

Kent	05-17-2019 06:53 AM

Hey 202 Islander- me too! Maybe we need to add one!!

202 islander

05-17-2019 08:46 AM

Quote:

Originally Posted by Kent (Post 4687277)

Hey 202 Islander- me too! Maybe we need to add one!!

Unfortunately on mine, at the transom the liner is only about an inch above the hull.

Baja Rooster

05-17-2019 10:59 AM

I don’t have a liner on my 272 Islander, but my drain plug was over an inch above the bottom and I boat on lakes that require a completely dry boat. I actually pulled the engine to fill the bottom with resin to level with the plug.

I know that this is of zero help but I felt like complaining. :)

Kent	05-17-2019 11:12 AM

Hey Baja Rooster now that's quite the feat!

30outlaw

05-21-2019 04:45 AM

Quote:

Originally Posted by 202 islander (Post 4687270)

I wish mine was like that !

most likely did it cause of the dual vs. single engine install and needed 2 holes for the engine oil drain lines...

All times are GMT -5. The time now is 06:39 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page