ISO OEM Navigation Light
#1
Registered
Thread Starter
ISO OEM Navigation Light
Looking for the oem nav lights on 07 35 Outlaw. Basically, they are the Aqua Signal Series 24 Tell Tale, round with chrome dome and white base. Lost the chrome cover, need to replace, Port side. They sell this light still online, but its with Stainless Steel housing, not chrome. Also, has a black base. I could change that out with what I have. I know XT Innovations had some at one time, Im sure sold out long ago.
Would be interested in a take off too if someone is upgrading to LED or whatever.
Any help much appreciated!
Would be interested in a take off too if someone is upgrading to LED or whatever.
Any help much appreciated!
#2
Registered
sent you a pm, your welcome to my oem nav lights, changed out to led
otherwise Marpac number 7-0059 is or is the same as oem
otherwise Marpac number 7-0059 is or is the same as oem
#4
Platinum Member
Platinum Member
Look for Attwood Lightarmour 2NM led NV1012SS. This is what I replaced mine with on our 30 Outlaw. Its actually the new model for what XT Innovations had at one time.
#5
Registered
#6
Registered
Thread Starter
ya, those are nice. Presume they can use the same OEM wiring leads? Wonder if those are the same Baja/Fountain is using on the new models coming out. I called them, left a vmail. Never heard back.....
Last edited by imartin; 06-03-2019 at 10:43 AM.
#7
Registered
the oe wire harness in boat just has male/female spade connectors, new lights were blunt cut wire, so i just crimped on spades and plugged in.... not sure what oem is currently try calling big thunder in loto they own or have ownership in baja.