Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   My Lab Job (https://www.offshoreonly.com/forums/baja/43887-my-lab-job.html)

HOUSTONPROP 04-16-2003 08:33 PM
shooter
 
Thanks ,I will call you tommorow. Darin

HOUSTONPROP 04-16-2003 09:02 PM
mailbox is full
 
Originally posted by HOUSTONPROP
these props must have been previously worked on? as the Mirage 3 bld comes in pitches such as 23,25,27, and so on give me a call on this one and I will be glad to help out /Thank'sDarin @ Houston Marine Propeller Service.
your mail box is full willtry later/Darin:eek:

HOUSTONPROP 04-17-2003 06:31 AM
GOODMORNING/SHOOTER/WE WILL CALL AND POST YOUR NUMBERS TONIGHT !!!!!!!!!!!!!!!!! HAVE A GREAT DAY /

HOUSTONPROP 04-17-2003 07:04 AM
not as easy as it looks
 
Originally posted by GottaHaveIt
Nothing a few minutes with a file couldn't fix! :D
yes it may not look bad here until its in your hand /there are 3 hrs in the props as we stand and a minium of 3 or more to do on these props /also shooter mentioned polishing/? I talked with him and the props are to be finished satin finish per request.( JUST IN CASE HE TAKES PICS) he does not want them thinned either but needs 300 more rpm and wants more speed/ props have alot of cavation burns on pushing side of blades will need to add cup also /its just as not as easy as it looks/and of course we all want more speed:D GOTTAHaveIt ,I know you were just kidding around ,I am just letting you know its more than one visually see's.;) OFF TO THE SHOP LATER.Darin

Shooter 04-17-2003 08:08 AM
I'm ok with the thinning, just not the "super thin" level. The mirage plus is pretty thick to being with. I beleive you said satin was better and was less effort and cost.

HOUSTONPROP 04-17-2003 10:25 PM
SHOOTERS LAB JOB!!!!
 
HERE are the tracking numbers 1z770x270317738949/The props were insured for 1,600.00 if your lucky the will get lost:D :D Not really ,again Thanks very much for you patience long over due and be careful on the Jap Bike:eek:

Happy Easter/

Darin;)

Shooter 04-28-2003 07:09 PM
1 Attachment(s)
Well... they sure are purdy, idled to the launch pretty good (just across the street from my lift) at least I'm lucky in some ways. I'll post the perfromance results after I finish my gel coat, bezels, chartplotter and all the other spring crap I bought.

Shooter 04-28-2003 07:10 PM
1 Attachment(s)
notice the trainling edge cup vs. the originals.

HOUSTONPROP 05-01-2003 10:36 AM
Originally posted by btrysNOTincl'd
Darin:

How much to lab-up a pair of Merc Mirage 26p props? And what's the exepcted turn-around time? I'm in Dallas.
250.00 each/Darin plus 15.00 shipping


All times are GMT -5. The time now is 10:51 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.