36 Outlaw Pictures
#112
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
Originally posted by TEAMBAJA
What kind of camera are you using DOCK? It does a nice job on the up close pictures. Mine sometimes tends to blur, then I have to do them over.........
What kind of camera are you using DOCK? It does a nice job on the up close pictures. Mine sometimes tends to blur, then I have to do them over.........
E-100RS
#114
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
If you have a Ford with the tow mirrow setup, you need these.
C-BetR Mirrors.
They are AWESOME. I find they are the only ones I look at anymore. Put them on the F-350 and the Excursion.
I found the guy on www.thedieselstop.com
C-BetR Mirrors.
They are AWESOME. I find they are the only ones I look at anymore. Put them on the F-350 and the Excursion.
I found the guy on www.thedieselstop.com
#116
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
Do you know what the 4x4's and 6x6 in the bed is for?
Yeah that is my instant curb (jack) in case of a flat. There is no way to jack this boat and trailer. I have torsion axles, and you just drive up on these timbers at an angle and the wheel is off the ground.
A curb works great, but they are hard to find on an interstate.
Hope I don't have to use them anytime soon.
Yeah that is my instant curb (jack) in case of a flat. There is no way to jack this boat and trailer. I have torsion axles, and you just drive up on these timbers at an angle and the wheel is off the ground.
A curb works great, but they are hard to find on an interstate.
Hope I don't have to use them anytime soon.
#117
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
Port Jacksonville Sea Ray / Fountain
Mr. Kevin Brady
If you need any warranty work on your Baja, need engine upgrades, strainers, drive showers, outdrives, exhaust tips,etc, etc, Kevin is the man to see.
They are a Mercury parts center and I have found them to have everything I have been looking for in stock and they usually ship the same day.
He just finished the complete rebuilds of my buddies 500's in a 1997 Sonic 42SS, and they dyno at 550 HP each.
He knows boats and engines. I have seen almost every brand boat in his shop including Cigarette, Pantera, Active Thunder, Formula, Scarab, Sonic, Donzi, Baja and Fountain.
Good honest work at a fair price.
Give Kevin a call and tell him "Dock" sent you.
Mr. Kevin Brady
If you need any warranty work on your Baja, need engine upgrades, strainers, drive showers, outdrives, exhaust tips,etc, etc, Kevin is the man to see.
They are a Mercury parts center and I have found them to have everything I have been looking for in stock and they usually ship the same day.
He just finished the complete rebuilds of my buddies 500's in a 1997 Sonic 42SS, and they dyno at 550 HP each.
He knows boats and engines. I have seen almost every brand boat in his shop including Cigarette, Pantera, Active Thunder, Formula, Scarab, Sonic, Donzi, Baja and Fountain.
Good honest work at a fair price.
Give Kevin a call and tell him "Dock" sent you.
#120
Charter Member #34
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
TeamBaja,
Looks NICE,
I did it on the 272, but for some reason I don't think I will on the 26.
At this time I think we are finished!
I will have to post some pictures of the flat screen TV however, it looks GREAT.
Looks NICE,
I did it on the 272, but for some reason I don't think I will on the 26.
At this time I think we are finished!
I will have to post some pictures of the flat screen TV however, it looks GREAT.