Thanks for the comments. The truck is a 2001 GMC Sierra C3 edition. They only made about 2900 of these. It is the predecessor to the Denali truck without Quadrasteer. It has a 6.0 gasser with aluminum heads, 325HP/370FtLbs torque. I’m running an RCD 6” lift with 315-70/17’s (about 34” tall). It has 3.73 gears and I can’t really tell any difference with the bigger tires (it came with 17” wheels, about 28” tall). It pulls the boat like a dream. When I’m running with my buddy’s I set the cruise and usually have to slow down for several miles after every hill to let them catch up. The truck just powers up and over like they were flat. Did Chiraco summit headed to Parker last week and did Grapevine today. I maintain 70 MPH on cruise control without a problem.

I’ll check out the prop labbing thing. How to I get a hold of Houston Props?

-A

Here’s a pic at Pyramid.

Nice 20 OL, Fresh!
Looking good out there!

Congrats,
Do you have tabs, if not that will help you plane much better/faster with loads in the boat.

http://www.offshoreonly.com/forums/m...fo&userid=5543