Outlaw Cabin Question
#3
Registered
#9
Registered
Join Date: Apr 2003
Location: Lake George, NY
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Daze,
Did Baja do the holes in the bulkheads or did Hightide?
If he did it, where did he get the trim rings? Does he notice any flex in the deck/hull or does it not matter?
Thanks.
Did Baja do the holes in the bulkheads or did Hightide?
If he did it, where did he get the trim rings? Does he notice any flex in the deck/hull or does it not matter?
Thanks.
#10
Platinum Member
Platinum Member
Hey Bret,
The lightening holes in the bulkheads are standard from Baja.
There should be no increase in flex from those holes. The bulkheads are mainly acting in planar comression and shear. The number and size of the holes you see will be of no consequence, other than to reduce weight. Plus they look cool.
The lightening holes in the bulkheads are standard from Baja.
There should be no increase in flex from those holes. The bulkheads are mainly acting in planar comression and shear. The number and size of the holes you see will be of no consequence, other than to reduce weight. Plus they look cool.