Re: imco shortie
 

The 29 OL I just bought has 1" shorties with 454 mpis, labbed 26 4 blades . I have seen 73 with it and it does blow out comming on plane. Other than that I am happy with them.

Re: imco shortie
 

are those mags (385hp) or mpis (310hp)?

Re: imco shortie
 

mags

Re: imco shortie
 

Can Someone With A 1999 /2000 36 Outlaw Measure
The Bottom Of The Transom To The Bottom Of The Hull And Let Me Know What It Is!!!!!!!!!! Maybe Doc?
Thanks!!!!!!!

Re: imco shortie
 

I will be glad to and can do it tonight, but I'm not sure I understand what dimension you are asking for?

Do you mean the very bottom of the vee in the center of the transom up to where the bottom starts to get flat?

Let me know.

Doc

Re: imco shortie
 

i will this weekend too if you let me know where

Re: imco shortie
 

From the very bottom center (under drain plug) up to where the vee ends and the hull is flat measures 11.55 inches on my 2002 model.

If this is not what you are looking for, please let me know.

I measured from the floor up to each point and took the difference to be accurate.

Re: imco shortie
 

It's only cold three quarters of year up here !!!!!

I would be moving SOUTH Buddy!!!!!!!!!!!!

Re: imco shortie
 

I would be moving SOUTH Buddy!!!!!!!!!!!!

yeah i know but are three months are really nice

Re: imco shortie
 

I am looking for the drive hieght I thought it would be easy
to get it from under the transom to the bottom of the boat.
it should be around 5 to 6 inches do it from the back of the boat under the transom!!!!!!!! thanks.