![]() |
Notched 30 ol........
I just heard from a reliable little birdie that Baja has a project underway to notch the transom of a 30ol to see how it performs. I can't wait to see it but I am curious if Baja is going to start cutting boats apart and adding notches and Steps?
Thoughts....... |
Re: Notched 30 ol........
Hey cig did after they said they wheren't
|
Re: Notched 30 ol........
Notches wouldn't be anything new for Baja. My 25OL had a notched transom.
|
Re: Notched 30 ol........
Yeah I know that but why would they add it now after they have been developing this boat for at least 4-5 years. I would love them to build a couple of stepped boats ( I know they built 2 42's with steps) to quiet the critics about baja's being slow. You can put a 29 fountain inside a 29 ol.
|
Re: Notched 30 ol........
Good question...I guess they had to build a few without notches to see what, if any, difference it makes.
The 42's with steps were built as such so that they could pace the APBA races back in 2000-2002. Racers were pissed that the pace boat was too slow. We don't need no stinkin' steps...let the critics critique. :D :D |
Re: Notched 30 ol........
They are actually going to notch the boat and then keep the notched piece, and re-glass it so that it can be put back in place the same day with some pre-tapped holes so they can check the performance the same day with the same conditions ect. I thought that was pretty ingenious. I am still waiting on the 35 ol.
|
Re: Notched 30 ol........
Originally Posted by Ironmanwb
They are actually going to notch the boat and then keep the notched piece, and re-glass it so that it can be put back in place the same day with some pre-tapped holes so they can check the performance the same day with the same conditions ect. I thought that was pretty ingenious. I am still waiting on the 35 ol.
|
Re: Notched 30 ol........
The notch helps when you run a high X. It keeps more water on the prop. I have the 97 Baja poker run 32. It has the full notched transom. It also had the hull blueprinted by Baja. Email me if you want to see some pics. [email protected]
|
Re: Notched 30 ol........
Originally Posted by CigDaze
We don't need no stinkin' steps...let the critics critique. :D :D
How's that new rig treating you? Any updated photos? |
Re: Notched 30 ol........
There are no notched 30's being developed or tested. Also, they only built one 42 with steps. The only boat they ever stepped.
|
Re: Notched 30 ol........
It would be hard to believe if this was infact true. Baja does make a nice "Family" boat. It was my impression that this was the companies goal. Putting notches or steps in the hull can only jeopordize that goal. I was alway under the impression that Baja would sacrafice the mph for the handling and safety factor.
|
Re: Notched 30 ol........
Originally Posted by Need-the-Speed
It would be hard to believe if this was infact true. Baja does make a nice "Family" boat. It was my impression that this was the companies goal. Putting notches or steps in the hull can only jeopordize that goal. I was alway under the impression that Baja would sacrafice the mph for the handling and safety factor.
Just my .02 |
Re: Notched 30 ol........
3 Attachment(s)
I'll agree with diversity. The steps, perhaps, slim chance imo. Baja is corporately owned. They are content making entry level boats. Remember, when you think performance, what do you think?....Baja. Slim chance. You think Nor-Tech, Cigarette, Fountain, Outerlimits etc. etc. I guess what I'm saying is, Baja has been unable to compete (performance wise) for so long, why would they jeopardize the reputation they have spent 20 years building on: a safe family boat. Fountain, Outerlimits, Nor-tech, push the envelope on a daily basis. Thats what brought them fame and fortune - Speed. Safety and a 24 degree hull made Baja (and perhaps a lot of Bang for the $$$). Furthermore, Baja sells a $hit load of boats using their current formula. Why screw with a good thing.
P.S. Don't get me wrong, I own a 02' 29ol and I absolutely love it. I just got really board and figured this would be a great debate. :D :drink: P.S.S. I added pictures because pictures are cool. :evilb: |
Re: Notched 30 ol........
Great looking boat Need......
|
Re: Notched 30 ol........
I am not sure who jimmy mcfly really is (maybe a Baja insider) but I know for a fact that this project is in the works. I am not sure if it is on the back burner now with all the other stuff they are trying to get done but I know this was in the works.
Take it for what it's worth. I don't really care either way. I am waiting on the 35ol, with 600's or maybe even more.....................God I love to dream. |
Re: Notched 30 ol........
There is no notched bottom in development. Period.
|
Originally Posted by jimmy mcfly
(Post 1254107)
There is no notched bottom in development. Period.
|
Did this boat sell yet, I know it has been for sale a long time?
Baja (made by Fountain) Pete |
Originally Posted by jimmy mcfly
(Post 1254107)
There is no notched bottom in development. Period.
That you did not have a clue what you were talking about!:evilb: What all have we seen since this first post? Many new models introduced. Many old models discountinued. Notched Transoms Pad Bottoms Liner Construction Carbon Fiber Hulls Staggered engines No bulk heads Broken boats OUT OF BUSINESS Who would have thunk it? |
I was told Baja built one 30 with a notch.
It had 6.2's and worked good. Hawkeye took a salvaged 30 w/HO's and had it notched, but it didn't work that well. |
Originally Posted by JaayTeee
(Post 2560278)
I was told Baja built one 30 with a notch.
It had 6.2's and worked good. Hawkeye took a salvaged 30 w/HO's and had it notched, but it didn't work that well. Just had to go check all my pictures again. I thought all the 30's were notched. Oh well |
Originally Posted by Dock Holiday
(Post 2560298)
Well sorry I stand corrected.
Just had to go check all my pictures again. I thought all the 30's were notched. Oh well |
Originally Posted by JaayTeee
(Post 2560315)
You're probably thinking of 35's..... they are.
How is your project coming along? Any more pictures of the air intake system you can share? I forgot which other thread that information was on. Thanks |
Originally Posted by Dock Holiday
(Post 2560329)
You are correct but I was convienced in my mind that the 30 was also.
How is your project coming along? Any more pictures of the air intake system you can share? I forgot which other thread that information was on. Thanks Project is still is cosmetic phase. I took the air boxes off with the intent of putting vinyl chrome ( mirror film) on the bases, and the remembered they were aluminum, so I started to sand on them to see if I can make them shiny.....but havent got around to finishing them.....they still may end up with vinyl chrome on them. Being that I can't have too many projects going at once, :rolleyes:, last weekend,I decided to lift the boat off the trailer and do some work on the strakes ( sharpening the edges) This, I have just about done ( more cosmetics to finish) ....the boat is useable, we're suppose to have the first Saturday this year that is going to be boatable, and the wife wants to go boating, so, no projects are getting completed this weekend. Should be done next week, I should have pic's then |
3 Attachment(s)
Originally Posted by JaayTeee
(Post 2560278)
I was told Baja built one 30 with a notch.
It had 6.2's and worked good. Hawkeye took a salvaged 30 w/HO's and had it notched, but it didn't work that well. Ive seen the boat for sale on a repo site recently. Here's some good memories from that boat (before the notch!) |
Originally Posted by TEAMBAJA
(Post 2560471)
We took an existing 30, pulled the engines and notched the transom before the 35 project was underway.
Ive seen the boat for sale on a repo site recently. Here's some good memories from that boat (before the notch!) you going to iowa with us ? dean and i are going but you may have to be seen towing one of those other boats;) if you want to ride along let me know |
Originally Posted by Kustom Kolors
(Post 2560665)
you act like you know something buddy :party-smiley-004:
you going to iowa with us ? dean and i are going but you may have to be seen towing one of those other boats;) if you want to ride along let me know |
you only live once ! come out it should be a good time
|
Originally Posted by Kustom Kolors
(Post 2560665)
you act like you know something buddy :party-smiley-004:
you going to iowa with us ? dean and i are going but you may have to be seen towing one of those other boats;) if you want to ride along let me know Would this be June 6th-7th, at a certain town on a river ?? We've been known to be seen there then:ernaehrung004: |
Originally Posted by Kustom Kolors
(Post 2560665)
you going to iowa with us ?
dean and i are going but you may have to be seen towing one of those other boats;) if you want to ride along let me know Looks like we are going. Adam is putting the finishing touches on his boat this week. I feel bad for Jason. With the combination of us and the Hawkeye boys, he's bound to end up with a few new scars after that weekend!:D |
Originally Posted by JaayTeee
(Post 2560903)
I've spent a little time in Iowa:D
Would this be June 6th-7th, at a certain town on a river ?? We've been known to be seen there then:ernaehrung004: Ive never been there. Do you know if its a dry county? |
been honing up on my drinking skills so i can hang with the big dogs out there . were bringing a 28 with twin 300 eggbeaters should be a rocket ship :boat:
|
Originally Posted by JaayTeee
(Post 2560903)
I've spent a little time in Iowa:D
Would this be June 6th-7th, at a certain town on a river ?? We've been known to be seen there then:ernaehrung004: |
Originally Posted by Dock Holiday
(Post 2560706)
I sure wish it was a different weekend I would be there.
|
Originally Posted by TEAMBAJA
(Post 2560970)
Ive never been there. Do you know if its a dry county?
Complements of the Beckers:D |
Originally Posted by TEAMBAJA
(Post 2560471)
We took an existing 30, pulled the engines and notched the transom before the 35 project was underway.
Ive seen the boat for sale on a repo site recently. Here's some good memories from that boat (before the notch!) |
Originally Posted by Kustom Kolors
(Post 2561117)
come on dock how many more chances you going to have with all of us guys in one spot again ? its going to be scary the last time we were all together was dealer meeting and i think jason lost something
I have made plans long ago with Jeff "SteelOutlawed" to go boating in Charleston, SC that weekend or I would be there. Somehow I have a hard time believing that that gang will not be together again after this event.:evilb: I'll look forward to seeing you at Lake Erie this summer. |
Dock bring jeff with you it will be worth both your time i would say:evilb:
|
Originally Posted by Kustom Kolors
(Post 2563266)
Dock bring jeff with you it will be worth both your time i would say:evilb:
|
when is it I may be looking for co pilot
|
| All times are GMT -5. The time now is 05:38 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.