Getting ready to restore
06-12-2017, 12:37 PM
#1
Registered
Thread Starter
Join Date: Jun 2017
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Getting ready to restore
just started restoring hull #19 and curious what speed I can expect out of a 5.7 with between 260 and 300 hp. I'm converting from a trs to a bravo drive. The boat will be fairly light as it will have no cabin interior just bare stringers. I'm also wondering if anyone has the ideal x dimension for this setup. Thanks guys.
07-18-2017, 04:01 PM
#6
Registered
Join Date: Mar 2013
Location: Connecticut
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Floor is not bonded to the stringers and if you haven't cut it yet, its easiest to cut around the perimeter of the floor. There is a thread about fuel tank replacement somewhere in this forum. A small block with 300ish hp and a bravo will get you around 60 mph I would imagine. I have hull #23 with a TRS and a 454 truck engine that runs about that.
The following users liked this post:
larslindroth (12-28-2022)
The following users liked this post:
larslindroth (12-28-2022)
The following 3 users liked this post by sp123:
