here is my try.

Damn 454!!! You have some serious freeboard huh???:D :D :D Ok, here is a hint. When you go to resize your pic smaller, do it in percentages. Such as 50% or 75%. Be sure you use the same percentages on the "Stretch & Skew" to keep the picture looking the same demensions. After you reduce it check the "Attributes" to see if it will fit. They don't have to be exactly 450X450. As long as both values are 450 or less. Example for round #'s, 3X5 picture. 3" is obviously going to be less PIXELS. As long as the 5" side is 450 or less the picture will fit the OSO board. Be sure to use JPEG or Gif when saving the picture in your FILE. It seems to work well with those. Good Luck! By the way guys, NICE BOATS!!!

This is the newer ride

454,
I didnt no you had the 253 with 3 ft beam. I had the same problem.:D
Dave

I finally figured out how to do this right.:D

At least I gave you guys a good laugh. That picture is damn funny. I had to post it.:D

I can't get my image to apprear...HELP!

http://www.geocities.com/njraptor660/10050008.jpg

:cool: :cool: :cool:

Pureattitude,

It looks like you have a Raptor (i was looking at the link you tried to post). Where do you ride. I have a Banshee, and we ride in NJ all the time.

I do have a Raptor. I live in North West NJ so i ride the abondoned railroad tracks that go to the Delaware Water Gap. I am selling the Raptor and buying a 02 Grizzly 660 or 02 Prairie 650. I did ride a few times at Sarco in south jersey.