![]() |
Brian, We are planning on making it up there a few times this summer before hot boat. Will let ya know! Also, Richland is northeast of Kalamazoo by Gull Lake and south of Gun Lake if you know where they are. Can't wait to see what you're boat does.
|
Bought my boat new at Gun Lake.
The water pump is back together and a new fuel filter in place. Started it up for a second in the garage and the headers are on the loud side without the water going through them. Will run it on the muff's maybe tomorrow. Can't wait for the weekend!!! |
[IMG]C:\Pictures\BOAT\P1090010.JPG[/IMG]
|
Should be a good day on Saturday! Post some #'s. And where do you usually boat? Hardy?
|
Yep, always go down to hardy and put in at Brower Park.
Heading down today to test it out. I'll let you know how it ran. I will have to dig my GPS out! |
Originally Posted by BHOCKETT
(Post 2553650)
Yep, always go down to hardy and put in at Brower Park.
Heading down today to test it out. I'll let you know how it ran. I will have to dig my GPS out! |
The boat ran great and I picked up 200rpm's on the tach.
My GPS would not engage so I don't have any mph numbers but I'm guessin with the 200rpm's that is about 2-3mph gain. The hydraulic steering works perfect and the boat handles much better, should have done this upgrade a long time ago. The oil filter felt a little hot and the port side header is running warmer then the starboard side so I thing I need to put a restrictor valve in the starboard side? Maybe put one in each side and keep some of the water out of the headers and more into the oil cooler? Had several people comment on how well the boat sounded and one guy thought I had put a procharger on, so the headers are a hit! |
Originally Posted by BHOCKETT
(Post 2554564)
The boat ran great and I picked up 200rpm's on the tach.
My GPS would not engage so I don't have any mph numbers but I'm guessin with the 200rpm's that is about 2-3mph gain. The hydraulic steering works perfect and the boat handles much better, should have done this upgrade a long time ago. The oil filter felt a little hot and the port side header is running warmer then the starboard side so I thing I need to put a restrictor valve in the starboard side? Maybe put one in each side and keep some of the water out of the headers and more into the oil cooler? Had several people comment on how well the boat sounded and one guy thought I had put a procharger on, so the headers are a hit! |
Had another guy who had a handheld also and his would not work either. Maybe a bad day for satellite reception?
Mine would only pick up one or two and then drop the signal again so it would not lock in. |
Originally Posted by BHOCKETT
(Post 2554615)
Had another guy who had a handheld also and his would not work either. Maybe a bad day for satellite reception?
Mine would only pick up one or two and then drop the signal again so it would not lock in. |
| All times are GMT -5. The time now is 04:34 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.