Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Chris Craft (https://www.offshoreonly.com/forums/chris-craft-155/)
-   -   First problem with the new boat Chris Stinger 260 (https://www.offshoreonly.com/forums/chris-craft/139641-first-problem-new-boat-chris-stinger-260-a.html)

HuronRiverRat 09-05-2006 10:35 AM

First problem with the new boat Chris Stinger 260
 
After looking for awhile, I finnaly bought a 1985 260 Stinger. Ive had it for a few weeks now. Had my first problem yesterday. The drive coupler on the starboard engine spun. Im going to order a new one this week and replace it over the weekend. Anyone have any tricks, tips or suggestions for a quick pull of the engine? I have the ability, tools and a hoist where I can do all the work. Thanks Dan

Full Force 09-05-2006 04:35 PM

Re: First problem with the new boat Chris Stinger 260
 

Originally Posted by HuronRiverRat
After looking for awhile, I finnaly bought a 1985 260 Stinger. Ive had it for a few weeks now. Had my first problem yesterday. The drive coupler on the starboard engine spun. Im going to order a new one this week and replace it over the weekend. Anyone have any tricks, tips or suggestions for a quick pull of the engine? I have the ability, tools and a hoist where I can do all the work. Thanks Dan

That sucks,call me this week,maybe I can stop by and come up with help.

glassdave 09-20-2006 07:24 PM

Re: First problem with the new boat Chris Stinger 260
 
Hi Dan. did you get the coupler fixed? they are actually very easy if the engine is "as merc installed" i did one of mine in about 3 an a half hours or so start to finish. luckily you have a ton of working room in the bilge.

HuronRiverRat 09-22-2006 08:50 AM

Re: First problem with the new boat Chris Stinger 260
 
Dave, I was going to fix it, but took it down to have new covers and a new interior made for it. I plan on pulling both engines over the winter and replacing both couplers at the same time. Then I can really clean and detail the engine compartement. Other than that, the boat is great! Dan

Full Force 09-22-2006 04:44 PM

Re: First problem with the new boat Chris Stinger 260
 
Dan,where ya been? going up this weekend?

HuronRiverRat 09-26-2006 10:58 AM

Re: First problem with the new boat Chris Stinger 260
 
Tim, sorry for not keeping in touch. I was out of town two weekends ago and this past weekend we had a birthday party at the house for my wife's aunt. We are thinking of a Kelleys trip this weekend. Most likely Saturday afternoon (sept 30th). Let me know what your up to. Dan

Full Force 09-26-2006 04:44 PM

Re: First problem with the new boat Chris Stinger 260
 
should be there if the weather is nice,I will call ya.

HuronRiverRat 10-02-2006 01:32 PM

Re: First problem with the new boat Chris Stinger 260
 
I took my Chris Craft cabin cruiser and the old blue Olsen out of the water Saturday morning, got em winterized and pressure washed. We ended up going to Put In Bay Saturday night instead of Kelleys. We watched the OSU game at the Brewery and then stuck around for the Ray Fogg show. Ended the night with a Frosty's Pizza and headed home. The weather was nicer than I expected on Sunday so I took advantage of it and shrink wrapped the big Chris. Did you go to Kelleys on Sunday? Dan

Full Force 10-02-2006 04:14 PM

Re: First problem with the new boat Chris Stinger 260
 
We went to Kelleys with the 353,we had to take the wife for a ride,we got yelled at for passing Scotts cousins 33 sea ray at 90 mph :D
The speed was not what made the wives mad it was the other wakes that m ade the ride fun!!


All times are GMT -5. The time now is 03:42 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.