Chris Cat - New owner
#11
Registered
Thread Starter
Join Date: Feb 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I thought they only used the 4's when you ran boxes. I kept my X demesion exactly the same as it was with the #2s the boat handled great and ran 106mph with the tired 650s. I also had props that were a tad under pitched and at that speed I was at 6000 as the motors are hitting the limiters. I got props with 2 inches more pitch and the motors are fresh Im hoping to pick up a little speed despite the extra weight from the #3s. We will see.
#12
Registered User
Join Date: Dec 2008
Location: tucson, az
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
i dont see what the difference is in a 3 or 4 i been told about a couple chris cats with 3s running faster than mine with 4s but im still figuring mine out and tuning. what x deminion are you running without boxes? im 4.25 above with boxes. are you getting any porpusing and what speeds?
#13
Registered
Thread Starter
Join Date: Feb 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
If your not running boxes your x demension should be lower. I was talking to greencard about his x and he is 3/4" above the bottom with 3s. Both of our boats are 7% prop slip which is good. Mine is 1/2" above the bottom. I havent run the boat this year with the 3s yet. But last year with the 2s I had no porpose at any speed unless my drives were trimed in to tight than she would hop at higher speed. If you are running boxes I dont no what the optimal x would be but greencard said he had some friends with that combo I would ask him. What power are you running? Let me know how you make out.
#14
Banned
Join Date: Oct 2006
Location: Bradenton Florida
Posts: 5,927
Likes: 0
Received 0 Likes
on
0 Posts
i dont see what the difference is in a 3 or 4 i been told about a couple chris cats with 3s running faster than mine with 4s but im still figuring mine out and tuning. what x deminion are you running without boxes? im 4.25 above with boxes. are you getting any porpusing and what speeds?
4.25 sound low to me thogh !!!!
Jeff also does 3/4 above with a #3 should be 1" +
#15
Registered
I went from IIs to IIIs on my chris cat.
Speed went up a couple mph. They IIIs are a little longer than the IIs and the X dimension was set with the propshaft about 1" above the bottom, higher than my IIs were at.
Speed went up a couple mph. They IIIs are a little longer than the IIs and the X dimension was set with the propshaft about 1" above the bottom, higher than my IIs were at.
#17
Registered
Chris Cat project
Jeff, Very nice project. Thanks for sharing in your "work in progress". Pics are appreciated. My project is located over on marineperformancetechtalk.com Good luck.