Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Chris Craft (https://www.offshoreonly.com/forums/chris-craft-155/)
-   -   260 stinger (https://www.offshoreonly.com/forums/chris-craft/210274-260-stinger.html)

Bulldog1 06-04-2009 11:45 AM

260 stinger
 
Does anyone know where I can purchase the drop down bolster seats and interior kit to upgrade my 83 Stinger to the 85 style?? Thanks!!

vtx1800sba 06-16-2009 07:16 PM

260 stinger
 
Sorry I can't help you on your search. But my wife and I are seriously looking to up size our boat to a 260 Stinger. We currently own a Chris Craft 210 bow rider. Out grew it. What do you think of yours? Good bad or indifferent? I realize I am being very general, but I've heard good and bad about them; particularly the latter 80s Stingers. Please advise.

Bulldog1 06-16-2009 09:26 PM

I love mine, although it is a very heavy boat and many people crap on its speed capabilities because of that. I have had 3 Baja boats of similar size, and honestly would rather cruise my Stinger.

vtx1800sba 06-17-2009 05:04 PM

260 Stinger
 
I'd rather have heavy and smooth in a boat (but not my woman). We are parting with our 210. Need something bigger and smoother. My wife (just 38years) had a stroke two weeks ago. Doc said no more little boat. Can't risk her getting jounced around for the foreseeable future. So it is up size or nothing at all.

Bulldog1 06-21-2009 09:17 AM

Ok, where are all the prop guys hiding? My Stinger runs 58mph with the stock 260hp sbc's in it (13x17 pitch props). What can I expect when the 425hp strokers find their new home, and what props should I run?

HTRDLNCN 06-21-2009 09:28 AM


Originally Posted by Bulldog1 (Post 2893271)
Ok, where are all the prop guys hiding? My Stinger runs 58mph with the stock 260hp sbc's in it (13x17 pitch props). What can I expect when the 425hp strokers find their new home, and what props should I run?

Something in your numbers is way off.
With 17pitch props your 350 would have to be spinning 6000+
rpm. Seeing as the stock 260/350s only spin about 4800-5000rpm
that is really not possible. Was that GPS speed or dream-o-meeter (speedo) speed?

Bulldog1 06-21-2009 01:33 PM

it was def just the speedo gauge, and I was wrong, the props are 14.5 x 19 pitch.

stony258 06-26-2009 06:13 PM


Originally Posted by Bulldog1 (Post 2893271)
Ok, where are all the prop guys hiding? My Stinger runs 58mph with the stock 260hp sbc's in it (13x17 pitch props). What can I expect when the 425hp strokers find their new home, and what props should I run?

Bulldog... This is what I'm running with my '88 260; 51 mph (GPS) @ 4500 rpm, and I'm running 14.5x21 props. However, this gives me a slip percentage of about 15%. I think this is higher than normal. Both props have been repaired, and one is ready for the scrap yard.

Are you running Alpha or Bravo drives?

Nitrousworx 09-20-2009 11:31 AM

Are you still looking for bolsters????????

glassdave 09-23-2009 07:02 PM


Originally Posted by vtx1800sba (Post 2889980)
Sorry I can't help you on your search. But my wife and I are seriously looking to up size our boat to a 260 Stinger. We currently own a Chris Craft 210 bow rider. Out grew it. What do you think of yours? Good bad or indifferent? I realize I am being very general, but I've heard good and bad about them; particularly the latter 80s Stingers. Please advise.

i absolutely loved mine, best bang for the buck out there. Very big for a 26 footer, my dock neighbor had a 30 scarab Panther and my 26 footer was bigger all the way around. If i remember they are close to 29 feet or so. Mid 80's were the best 84,85,86 i had heard some of the later ones had structural issues but i believe that was in the larger over 30 foot models. Mine was built like a tank.

pics an stuff :D

http://stupidfastboats.com/dave.htm


All times are GMT -5. The time now is 10:55 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.