Ignition setup for 89 260 Stinger?
#1
Registered
Thread Starter
Join Date: Dec 2010
Location: Kentuckiana Area
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Ignition setup for 89 260 Stinger?
Whats the Best ignition setup for my 89 260 Stinger with twin 5.7? Wanting to replace the coil and plug wires and what ever else you guys have done or suggest doing. This boat has become a big project, but i'm enjoying so far lol.
#2
Registered
Any aftermarket high voltage coil is better than stock Try to get at least 50-80 thousand volt such as an Accel or Mallory.
8mm wires also help as the stock 7mm wires are ok but bigger is better.
Remeber not to cross any of the wire so you don[t get cross fire induction. Use good wire looms and run then parallel and neatly.
Bob's your uncle and have fun on the water! My boat is getting wet next week. Can hardly wait!!!
8mm wires also help as the stock 7mm wires are ok but bigger is better.
Remeber not to cross any of the wire so you don[t get cross fire induction. Use good wire looms and run then parallel and neatly.
Bob's your uncle and have fun on the water! My boat is getting wet next week. Can hardly wait!!!