cutout switch
09-02-2012, 10:57 AM
#1
Registered
Thread Starter
Join Date: Jul 2006
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
cutout switch
what position should the cut-out switch be in when in full forward or reverse?
I have read Clymers a number of times for adjusting this switch, but do not seem to get it.
should the roller be in the notch when fully in forward or reverse?
Or does it need to be in the notch when in neutral?
when shifting between forward/reverse and reverse/forward, I see the roller moving out of the notch to depresss the switch = but when in gear where should the switch be?
I have read Clymers a number of times for adjusting this switch, but do not seem to get it.
should the roller be in the notch when fully in forward or reverse?
Or does it need to be in the notch when in neutral?
when shifting between forward/reverse and reverse/forward, I see the roller moving out of the notch to depresss the switch = but when in gear where should the switch be?
