Scorpion 260 "Mystery"
#43
Registered
Join Date: Aug 2015
Location: Willowbeach Ontario Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
How is the progress coming along on your scorpion restore? These boats are so big for a 26 ft boat.... If you measure the wetted surface of the boat is 26 ft but if you measure from the stern to the bow she's around 30ft I absolutely love the room in the engine bay to work. Much better then a lot of other "performance" boats out there
#44
Registered
Thread Starter
Join Date: Nov 2014
Location: Greer, SC
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
It took me 9 months to get her home and she was so NASTY! I have not had a lot of time to work on her, but I have gotten the outside cleaned up and the Cuddy is mostly cleaned. The Cockpit is next.
I have removed two of the windows and most likely will Replace all four. John at Chrisparts.com is pretty helpful for some of the parts I need.
I need to put up some new pics.
Yes she is a big boat. I know they are supposed to be 26'4, but they do seam much larger...esp when they are behind your truck on the interstate! I have been wanting to measure and see how long she actually is. I know the trailer to swim platform is abbot 33'-3"
I am still looking for an emblem like this one for the PORT side...sadly mine is gone
I have removed two of the windows and most likely will Replace all four. John at Chrisparts.com is pretty helpful for some of the parts I need.
I need to put up some new pics.
Yes she is a big boat. I know they are supposed to be 26'4, but they do seam much larger...esp when they are behind your truck on the interstate! I have been wanting to measure and see how long she actually is. I know the trailer to swim platform is abbot 33'-3"
I am still looking for an emblem like this one for the PORT side...sadly mine is gone
#47
Registered
Join Date: Aug 2015
Location: Willowbeach Ontario Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Looking good! keep your eye on ebay. From time to time chris craft name plates pop up on there. If I had one I could part with I'd ship it out to you... next time I get over to the wreckers i'll see if there's anything left on the old chris'
Nice you have a place indoors to work on it. I did my transom and stringers in my driveway under a tarp. Would have killed to had indoor space!
Nice you have a place indoors to work on it. I did my transom and stringers in my driveway under a tarp. Would have killed to had indoor space!