Offshoreonly.com - Scorpion 260 "Mystery"

Page 6 of 6

« First

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Chris Craft (https://www.offshoreonly.com/forums/chris-craft-155/)

- - Scorpion 260 "Mystery" (https://www.offshoreonly.com/forums/chris-craft/320717-scorpion-260-mystery.html)

340mopar

01-26-2016 11:50 AM

http://i.imgur.com/TskR2WI.jpg

Just an update pic

340mopar

02-03-2016 01:49 PM

http://i.imgur.com/ylzMkdn.jpg

340mopar

02-25-2016 02:00 PM

Time to clean out the boat!http://i.imgur.com/Z6nFz3b.jpg

340mopar

02-25-2016 02:02 PM

http://i.imgur.com/7UcJ6HX.jpg

Too much to do with Spring around the corner

340mopar

04-26-2016 08:19 AM

I picked up an Alpha 1.50:1 - One more to go...

http://i.imgur.com/ripBQTx.jpg

340mopar

05-24-2016 09:16 AM

I need two sets of brass drain plugs for the 350's any suggestions?

Cajun 2 Stepp

05-25-2016 09:52 AM

What drain plugs are you talking about?

340mopar

05-25-2016 10:03 AM

the brass water plugs in the cooling system, exhaust, etc.
about 3/8" in diameter..

http://i.imgur.com/fh969YG.jpg

sprink58

05-25-2016 03:01 PM

340...you need to find a good old fashioned hardware store or Pipe Fitter/Plumbing Contractor Supply house. You're not going to find this stuff at Home Depot...try ACE though...they might surprise you.

340mopar

05-26-2016 09:44 AM

I suppose the obvious has eluded me ... why should I seek out marine parts, when std hardware will work just fine?

All times are GMT -5. The time now is 04:00 PM.

Page 6 of 6

« First

Show 40 post(s) from this thread on one page